771240
37
Zoom out
Zoom in
Previous page
1/40
Next page
Changing the Fuse in the Power Cable
1Open the fuse housing .
2Twist and pull the fuse to remove it .
3Insert a new 3 A fast-blow fuse.
4Close the fuse housing.
My device will not acquire GPS signals
If the device is not acquiring satellite signals, there could be a few causes. If the device has moved a large
distance since the last time it has acquired satellites or has been turned off for longer than a few weeks or
months, the device may not be able to acquire the satellites correctly.
Ensure the device is using the latest software. If not, update the device software (Updating Software with the
ActiveCaptain App, page 6).
My sonar does not work
Push the transducer cable all the way into the back of the device.
Even if the cable seems to be connected, you should push firmly so that it is fully seated.
Press , and ensure sonar is enabled.
Select the correct transducer type (Selecting the Transducer Type, page 11).
My device is not creating waypoints in the correct location
You can manually enter a waypoint location to transfer and share data from one device to the next. If you have
manually entered a waypoint using coordinates, and the location of the point does not appear where the point
should be, the map datum and position format of the device may not match the map datum and position
format originally used to mark the waypoint.
Position format is the way in which the GPS receiver's position appears on the screen. This is commonly
displayed as latitude/longitude in degrees and minutes, with options for degrees, minutes and second, degrees
only, or one of several grid formats.
Map datum is a math model which depicts a part of the surface of the earth. Latitude and longitude lines on a
paper map are referenced to a specific map datum.
1Find out which map datum and position format was used when the original waypoint was created.
If the original waypoint was taken from a map, there should be a legend on the map that lists the map datum
and position format used to create that map. Most often this is found near the map key.
2Select Settings > Units.
3Select the correct map datum and position format settings.
4Create the waypoint again.
My device does not display the correct time
Time is set by GPS position and time zone setting.
1Select Settings > Units > Time Zone.
2Ensure the device has a GPS fix.
Appendix 33
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin STRIKER Vivid 4cv at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin STRIKER Vivid 4cv in the language / languages: English as an attachment in your email.

The manual is 5.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin STRIKER Vivid 4cv

Garmin STRIKER Vivid 4cv User Manual - German - 42 pages

Garmin STRIKER Vivid 4cv User Manual - Dutch - 40 pages

Garmin STRIKER Vivid 4cv User Manual - French - 44 pages

Garmin STRIKER Vivid 4cv Installation Guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info