771240
32
Zoom out
Zoom in
Previous page
1/40
Next page
Setting the Keel Offset
You can enter a keel offset to compensate the water depth reading for the transducer installation location. This
allows you to view the depth of the water below the keel or the true depth of the water, depending on your
needs.
If you want to know the water depth below the keel or the lowest point of your boat and the transducer is
installed at the water line or anywhere above the end of the keel, measure the distance from the transducer
location to the keel of the boat.
If you want to know the true water depth and the transducer is installed below the water line, measure the
distance from the bottom of the transducer up to the water line.
NOTE: This option is only available when you have valid depth data.
1Measure the distance:
If the transducer is installed at the water line or anywhere above the end of the keel, measure the
distance from the transducer location to the keel of the boat. Enter this value as a positive number.
If the transducer is installed at the bottom of the keel and you want to know the true depth of the
water, measure the distance from the transducer to the water line. Enter this value in as a negative
number.
2Select Settings > My Vessel > Keel Offset.
3Select if the transducer is installed at the water line, or select if the transducer is installed at the
bottom of the keel.
Setting the Water Temperature Offset
You can set the temperature offset to compensate for the temperature reading from a temperature-capable
sensor.
1Measure the water temperature using the temperature-capable transducer that is connected to the device.
2Measure the water temperature using a different thermometer or temperature sensor that is known to be
accurate.
3Subtract the water temperature measured in step 1 from the water temperature measured in step 2.
This is the temperature offset. Enter this value in step 5 as a positive number if the sensor connected to the
device measures the water temperature as being colder than it actually is. Enter this value in step 5 as a
negative number if the sensor connected to the device measures the water temperature as being warmer
than it actually is.
4Select Settings > My Vessel > Temp. Offset.
5Use the arrow keys to enter water temperature offset measured in step 3.
28 Device Configuration
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin STRIKER Vivid 4cv at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin STRIKER Vivid 4cv in the language / languages: English as an attachment in your email.

The manual is 5.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin STRIKER Vivid 4cv

Garmin STRIKER Vivid 4cv User Manual - German - 42 pages

Garmin STRIKER Vivid 4cv User Manual - Dutch - 40 pages

Garmin STRIKER Vivid 4cv User Manual - French - 44 pages

Garmin STRIKER Vivid 4cv Installation Guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info