Manual Garmin Striker 4 (page 11 of 16) (English)

657481

Zoom out

Zoom in

1/16

A magenta line appears. In the center of the magenta line is

a thinner purple line that represents the corrected course

from your present location to the destination. The corrected

course is dynamic, and it moves with your boat when you are

off course.

Review the course indicated by the magenta line.

Follow the magenta line along each leg in the route, steering

to avoid land, shallow water, and other obstacles.

If you are off course, follow the purple line (corrected course)

to go to your destination, or steer back to the magenta line

(direct course).

Deleting a Saved Route

Select User Data > Routes.

Select a route.

Select Delete.

Deleting All Saved Routes

Select User Data > Manage Data > Clear User Data >

Routes.

Track

A track is a recording of the current path of your boat. You can

show your current track in waypoint map view.

Setting the Color of the Track

Select User Data > Track > Track Options > Track Color.

Select a track color.

Clearing the Track

Select User Data > Track > Clear Track > OK.

Managing the Track Log Memory During

Recording

Select User Data > Track > Track Options.

Select Record Mode.

Select an option:

• To record a track log until the track memory is full, select

Fill.

• To continuously record a track log, replacing the oldest

track data with new data, select Wrap.

Configuring the Recording Interval of the

Track Log

You can indicate the frequency at which the track plot is

recorded. Recording more frequent plots is more accurate but

fills the track log faster. The resolution interval is recommended

for the most efficient use of memory.

Select User Data > Track > Track Options > Record

Intervals > Interval.

Select an option:

• To record the track based on a distance between points,

select Distance > Change, and enter the distance.

• To record the track based on a time interval, select Time >

Change, and enter the time interval.

• To record the track plot based on a variance from your

course, select Resolution > Change, and enter the

maximum error allowed from the true course before

recording a track point.

Deleting All Saved Waypoints, Routes, and

Tracks

Select User Data > Manage Data > Clear User Data > All >

OK.

Device Configuration

System Settings

Select Settings > System.

Display: Adjusts the backlight brightness (Adjusting the

Backlight, page 1) and color scheme (Adjusting the Color

Mode, page 1).

GPS: Provides information about the GPS satellite settings and

fix.

Language: Sets the on-screen language.

Simulator: Turns on the simulator and allows you to set the

speed and simulated location.

Beeper: Turns on and off the tone that sounds for alarms and

selections (Setting the Beeper, page 1).

Auto Power: Turns on the device automatically when power is

applied.

System Information: Provides information about the device and

the software version.

System Information

Select Settings > Settings > System Information.

Event Log: Allows you to view a log of system events.

Software Information: Provides information about the device

and the software version.

Garmin Devices: Provides information about connected Garmin

devices.

Factory Settings: Restores the device to factory settings.

NOTE: This deletes any setting information you have

entered.

My Vessel Settings

NOTE: Some settings and options require additional hardware.

Select Settings > My Vessel.

Transducer Type: Displays the type of transducer connected to

the device (Selecting the Transducer Type, page 1).

Keel Offset: Offsets the surface reading for the depth of a keel,

making it possible to measure depth from the bottom of the

keel instead of from the transducer location (Setting the Keel

Offset, page 7).

Temp. Offset: Compensates for the water temperature reading

from a temperature-capable transducer (Setting the Water

Temperature Offset, page 8).

Setting the Keel Offset

You can enter a keel offset to compensate the surface reading

for the depth of a keel, making it possible to measure water

depth or depth below the keel instead of depth below the

transducer. Enter a positive number to offset for a keel. You can

enter a negative number to compensate for a large vessel that

may draw several feet of water.

Complete an action, based on the location of the transducer:

• If the transducer is installed at the water line

, measure

the distance from the transducer location to the keel of the

boat. Enter this value in steps 3 and 4 as a positive

number to display depth below keel.

• If the transducer is installed at the bottom of the keel

measure the distance from the transducer to the water

line. Enter this value in steps 3 and 4 as a negative

Track 7

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Striker 4 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Striker 4

Garmin Striker 4 User Manual - German - 16 pages

Garmin Striker 4 User Manual - Dutch - 16 pages

Garmin Striker 4 User Manual - French - 16 pages

Garmin Striker 4 Installation Guide - All languages - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin Striker 4 Manual

Product: