25541
65
Zoom out
Zoom in
Previous page
1/74
Next page
63
Transferring City Navigator CD Data to a Data Card (USB Programmer)
Included with your purchase of the StreetPilot III is a Universal Serial Bus (USB) Data Card
Programmer, which allows you to quickly download maps from your PC to a data card that is also
included with the StreetPilot III. Follow the directions in the USB Data Card Programmer User’s
Manual to install the software, then connect the programmer to your PC’s USB port. Once you’ve
inserted the City Navigator CD and started the MapSource program on your PC, move the cursor to the
pull-down menu at the top of the screen and select “City Navigator.”
Now, select the detailed coverage areas you want to download. You can continue to add map areas
until the total map size reaches the limit of your data card. Click on the download button at the top of
the screen, and the information quickly downloads to the data card. As you load different map areas,
MapSource will overwrite previously stored data.
Older model PC’s may not have a USB Port or operating system support for a USB connection. In
such instances, you may program the data card directly through the StreetPilot III. Connect the Street-
Pilot III to the PC using the supplied PC cable. Insert the data card into the StreetPilot III. Run the
MapSource program, select the desired maps and transfer the map data. Using this method to program
your data card is MUCH slower than using a USB connection. Map data that transfers in minutes using
a USB programmer can take 30 minutes or longer when programmed through the StreetPilot III.
For more information, please refer to the MapSource User’s Manual and Reference Guide under
“Creating and Using Map Sets” and “Transferring Data.”
Installing the Data Card
When you’re fi nished downloading, remove the data card from the USB Programmer and insert it
into the slot with the label facing toward the front of the StreetPilot III. Make sure the connector end of
the cartridge is inserted into the slot, NOT the handle end. When properly inserted, the cartridge will
protrude slightly from the slot (not fl ush).
CAUTION: Incorrect data card installation can result in internal damage to your GPS unit!
Using MapSource
and Data Cards
Appendix G
,
The supplied USB Programmer allows you to quickly
download City Navigator maps using your PC. Refer
to the USB Programmer User’s Manual and Reference
Guide for additional instructions.
Insert the data card into the StreetPilot III with the label
facing the front of the unit, and with the handle end out.
190-00256-10_0B.indd 63 1/13/2003, 10:34:32 AM
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin StreetPilot_III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin StreetPilot_III in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info