from the Interface tab. Do not change any of the other
settings unless you are an authorized Garmin installer
for the StreetPilot 2650.
Interface tab--StreetPilot 2650 OnlyInterface tab--StreetPilot 2650 Only
The Interface tab only appears on the StreetPilot 2650 with Dead Reckoning (DR) sensors. Most ofThe Interface tab only appears on the StreetPilot 2650 with Dead Reckoning (DR) sensors. Most of
the information included in this tab is provided for and should be usedthe information included in this tab is provided for and should be used only by authorized Garminonly by authorized Garmin
installersinstallers who must install the Dead Reckoning (DR) cable for your StreetPilot 2650. If necessary, you can who must install the Dead Reckoning (DR) cable for your StreetPilot 2650. If necessary, you can
customize the bottom-row settings on this tab (USB Format and Serial Format).customize the bottom-row settings on this tab (USB Format and Serial Format).
Your StreetPilot 2650 is set up to transfer data via a USB connection. If you need to use a serial portYour StreetPilot 2650 is set up to transfer data via a USB connection. If you need to use a serial port
connection, change the settings below as necessary:connection, change the settings below as necessary:
USB FormatUSB Format ––If you are using the Garmin USB cable to transfer data, keepIf you are using the Garmin USB cable to transfer data, keep USB FormatUSB Formatset to set to GarminGarmin..
Change it toChange it to NoneNone only if you plan to use a serial cable instead of USB. only if you plan to use a serial cable instead of USB.
Serial FormatSerial Format ––If you are using the Garmin USB cable to transfer data, keep If you are using the Garmin USB cable to transfer data, keep Serial FormatSerial Formatset to set to NoneNone..
If you plan to use a serial cable, choose from one of the available settings below:If you plan to use a serial cable, choose from one of the available settings below:
• Garmin: The proprietary format used to exchange waypoint, route, track log data with a PC via serial• Garmin: The proprietary format used to exchange waypoint, route, track log data with a PC via serial
connection. Use this format for software updates and to save mapping software to the StreetPilot’sCFconnection. Use this format for software updates and to save mapping software to the StreetPilot’s CF
card.card.
• NMEA: Supports the input/output of standard NMEA 0183 version 3.01 data.• NMEA: Supports the input/output of standard NMEA 0183 version 3.01 data.
• TextOut: Supports a standardized, fixed-column ASCII output with data for position, track, speed,•Text Out: Supports a standardized, fi xed-column ASCII output with data for position, track, speed,
etc.etc.
• None: Provides no interfacing capabilities.• None: Provides no interfacing capabilities.
Note:Note: Only the USBOnly the USB oror the serial cable can be used at one time; you cannot use both at once. Thus, either the serial cable can be used at one time; you cannot use both at once. Thus, either
USB FormatUSB Format or or Serial FormatSerial Formatmust be set to must be set to NoneNone..
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Garmin streetpilot 2610 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Garmin streetpilot 2610 in the language / languages: English as an attachment in your email.
The manual is 2,14 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
