657459

Garmin Rino 755T Manual

7
Zoom out
Zoom in
Previous page
1/30
Next page
Radio
In the United States and Canada, this device uses Family Radio
Service (FRS) and General Mobile Radio Service (GMRS) for
two-way communication with other compatible radio devices.
In Australia, this device uses UHF Citizen Band Radio Service
(UHF CBRS), and in New Zealand, this device uses UHF
Personal Radio Service (PRS) for two-way communication with
other compatible radio devices.
When communicating with other Garmin Rino devices,
additional features are available.
Transmitting
To communicate with other Rino and FRS/GMRS or UHF
CBRS/PRS radio users, you must be on the same channel and
code (Channels and Codes, page 3).
1
Hold PTT.
2
Speak into the front of the device.
3
After you are finished speaking, release PTT.
After you release PTT, the radio transmits your position
information, and you cannot hear incoming transmissions
until your transmission is complete . A roger tone sounds on
your radio and on the radios receiving your transmission to
confirm that the transmission is complete.
NOTE: You can change or disable the roger tone (Setting the
Device Tones, page 15).
The Radio App
Using the radio app, you can view information about the radio,
control the radio channel and squelch codes, and customize the
radio features.
Icons along the top of the radio page provide useful information
about the radio.
: Indicates the activity status of the radio. When an arrow is
pointing at the radio, the radio is receiving a transmission.
When an arrow is pointing away from the radio, the radio is
transmitting.
: The radio is ready to transmit position information (Peer-to-
Peer Positioning, page 4).
: Weather alerts are enabled (Radio App Settings, page 4).
: The radio is muted (Adjusting the Radio Volume, page 3).
Opening the Radio App
You can manage your channel, code, and other radio settings in
the radio app.
From the app drawer, select Radio.
TIP: You can also select the radio dashboard at the top of the
main menu to open the radio app.
Adjusting the Radio Volume
1
From any screen, select the volume keys to change the radio
volume.
The volume screen appears.
2
Select to mute or restore the radio volume (optional).
Adjusting the Squelch Level
You can adjust the sensitivity level of the squelch to filter out
background noise. When you adjust the squelch level higher,
fewer weak background signals are heard.
1
When you hear unwanted background noise, from any
screen, select the volume keys.
The volume screen appears.
2
Select under the Squelch bar.
You should increase the squelch level until you no longer
hear the unwanted background noise.
Channels and Codes
To communicate with other Rino and FRS/GMRS or UHF
CBRS/PRS radio users, you must be on the same channel.
Rino devices are compatible with third-party FRS/GMRS or UHF
CBRS/PRS radios as long as the radios use standard FRS/
GMRS or CBRS/PRS frequencies. A list of all frequencies used
by this device is available in the product specifications (Radio
Frequency Charts, page 18).
NOTE: GMRS frequencies are regulated by the FCC in the
United States. To transmit on GMRS frequencies, you must
obtain a license from the FCC (FCC Licensing Information,
page 20).
US and Canada Channel Number Channel Type
1 through 7 GMRS and FRS channels
8 through 14 FRS channels
15 through 22 GMRS channels
15R through 22R Repeater channels
Australia and New Zealand Channel
Number
Channel Type
1 through 40 UHF CBRS/PRS channels
1R through 8R CBRS/PRS repeater channels
Squelch codes allow you to filter calls from other users on the
same channel, so you hear only the radios you want to hear.
The device has two different squelch modes, Continuous Tone
Controlled Squelch System (CTCSS) and Digital-Coded Squelch
(DCS). Calls on the channel that are not using the same squelch
code in the same squelch mode are ignored.
NOTE: Squelch codes do not make your conversation private.
Anyone on the same channel can hear your conversation.
Squelch Tone
Mode
Squelch Codes
CTCSS 1 through 38
DCS Listed in the product specifications (Radio
Frequency Charts, page 18)
Selecting a Channel
1
From the radio app, select Channel.
2
Select or to change the channel.
3
Select .
Selecting a Squelch Code
1
From the radio app, select Code CTCSS or Code DCS.
2
Select or to change the code.
NOTE: Selecting Off allows you to hear everything on the
channel.
3
Select .
NOTE: If you cannot hear calls on the same channel with the
same code, make sure all the radios are using the same squelch
tone mode (Changing the Squelch Tone Mode, page 3).
Changing the Squelch Tone Mode
This device can use two types of squelch tone modes, CTCSS
and DCS. If you cannot hear calls on the same channel with the
same code, make sure all the radios are using the same squelch
tone mode.
1
From the radio app, select > Radio Setup > Squelch
Tone Mode.
2
Select a squelch tone mode.
Monitoring a Channel for Activity
You can monitor a single channel for any activity, including static
and weak voice signals. This is helpful if a signal is going out of
range.
1
From the radio app, select the channel you want to monitor.
Radio 3
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Rino 755T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Rino 755T in the language / languages: English as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info