522252
6
Zoom out
Zoom in
Previous page
1/22
Next page
Sensors and GPS Data
Viewing the Data Pages
Customizable data pages allow you to quickly access real-time
data for the compass, barometer, and temperature sensors.
When you begin tracking or navigating, additional data pages
appear.
Data pages can also show data streamed from your NMEA
2000 network through a Garmin
®
GNT.
From the time of day page, select or to cycle through
the data pages.
NOTE: Sensor data is not recorded to the device.
Data Page Flows
By default, the time, compass, barometer, and temperature
pages appear in all data page flows. The organization and
appearance of other data pages depends on these conditions.
The active profile.
Whether you are tracking, navigating, or viewing only sensor
data.
Whether you are streaming NMEA 2000 data through a
Garmin GNT.
The data fields on each page can be customized. Some data
fields are available only when streaming NMEA 2000 data
(page 14).
Turning On a Sensor Mode
The default sensor mode is on demand mode, which offers you
quick access to compass, altimeter, barometer, or temperature
data. You can also put the device in always on mode to display
continuous sensor data.
1
Select the blue key.
2
Select Setup > Sensors > Mode > Always On.
Compass
The device has a 3-axis compass with automatic calibration.
Compass navigation (page 3)
Compass settings (page 10)
Calibrating the Compass
NOTICE
Calibrate the electronic compass outdoors. To improve heading
accuracy, do not stand near objects that influence magnetic
fields, such as vehicles, buildings, and overhead power lines.
Your device was already calibrated at the factory, and the
device uses automatic calibration by default. If you experience
irregular compass behavior, for example, after moving long
distances or after extreme temperature changes, you can
manually calibrate the compass.
1
Select the blue key.
2
Select Setup > Sensors > Compass > Calibrate > Start.
3
Follow the on-screen instructions.
Altimeter and Barometer
The device contains an internal altimeter and barometer.
On Demand sensor data (page 2)
Always On sensor data (page 2)
Altimeter settings (page 11)
Changing the Plot Type
You can change the way the device plots barometer and
elevation data.
1
Select the blue key.
2
Select Setup > Sensors > Altimeter.
3
Select Baro. Plot or Elev. Plot.
4
Select an option.
Calibrating the Barometric Altimeter
Your device was already calibrated at the factory, and the
device uses automatic calibration by default. You can manually
calibrate the barometric altimeter if you know the correct
elevation or the correct barometric pressure.
1
Select the blue key.
2
Select Setup > Sensors > Altimeter > Calibrate.
3
Follow the on-screen instructions.
Acquiring Satellites
Before you can use the GPS navigation features, such as
recording a track, you must acquire satellite signals.
The device may need a clear view of the sky to acquire satellite
signals. The time and date are set automatically based on the
GPS position. To adjust the time settings, see page 8.
For more information about GPS, go to www.garmin.com
/aboutGPS.
1
Select the blue key.
2
Select Start GPS.
3
Wait while the device locates satellites.
Stopping GPS
1
Select the blue key.
2
Select Stop GPS.
Navigation
You can navigate to a route, track, waypoint, geocache, or any
saved location in the device. You can use the map or the
compass to navigate to your destination.
Navigating to a Destination
You can navigate to a destination using the compass or map
(page 5).
1
Select the blue key.
2
Select Start GPS.
3
Wait while the device locates satellites.
4
Select the blue key.
5
Select an option:
Select Waypoints.
Select Tracks.
Select Routes.
Select GPS Tools > Coordinates.
Select GPS Tools > POIs.
6
Select a destination.
7
Select Go.
The device displays time to destination
À
, distance to
destination
Á
, and estimated time of arrival
Â
.
8
Select to view the compass page.
2 Navigation
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Quatix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Quatix in the language / languages: English as an attachment in your email.

The manual is 3,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Quatix

Garmin Quatix Quick start guide - English - 6 pages

Garmin Quatix User Manual - German - 24 pages

Garmin Quatix User Manual - Dutch - 22 pages

Garmin Quatix User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info