Manual Garmin Quatix 6 (page 10 of 58) (English)

733405

Zoom out

Zoom in

1/58

Select UP or DOWN to view the tide data from other days.

Fishing

Going Fishing

You can keep track of your daily fish count, count down your

competition time, or set an interval timer to keep track of your

fishing pace.

From the watch face, select MOB > Fish.

Select an option:

• To count down your remaining competition time, select

Set Timers.

• To track your daily fish count, select Start Fishing > New

Count, and select MOB to increase or BACK to decrease

your fish count.

Anchor

Marking Your Anchor Location

From the watch face, select MOB > Anchor.

Select MOB > Drop Anchor.

Anchor Settings

Select MOB > Anchor > MOB.

Drift Radius: Sets the allowable drift distance while anchored.

Update interval: Sets the time interval for updating anchor data.

Anchor Assist Settings

From the anchor assist screen, select MOB.

Scope: Sets the first number in the anchor scope ratio. The ratio

is the length of anchor rode in use to the vertical distance

from the bow of the boat to the bottom of the water.

Depth: Sets the depth of the water.

Bow Offset: Sets the distance between the bow of your boat

and the location of your GPS antenna.

Autopilot

WARNING

You are responsible for the safe and prudent operation of your

vessel. The autopilot is a tool that enhances your capability to

operate your boat. It does not relieve you of the responsibility of

safely operating your boat. Avoid navigational hazards and

never leave the helm unattended.

Always be prepared to promptly regain manual control of your

boat.

Learn to operate the autopilot on calm and hazard-free open

water.

Use caution when operating the autopilot near hazards in the

water, such as docks, pilings, and other boats.

Pairing With an Autopilot

From the watch face, select MOB > Autopilot > MOB.

Bring your quatix device within 3 m (10 ft.) of the marine

device.

Set your compatible Garmin autopilot helm control to search

for a remote control.

See your autopilot helm control owner's manual for more

information.

After you pair the devices, they connect automatically when

turned on, within range, and the app is open on the watch. If you

need to pair with another autopilot helm control, in the autopilot

app, hold MENU and select Settings > Pair New.

Controlling the Autopilot

From the watch face, select MOB > Autopilot.

Select an option:

• To engage the autopilot heading hold, hold a steady

course, select MOB, and release the helm.

• To change the heading, with the autopilot engaged, select

UP for starboard and DOWN for port.

• To change the steering mode, hold MENU, select

Steering Mode, and select an option.

• To perform a steering pattern, hold MENU, select Pattern

Steering, and select a pattern.

NOTE: You can change the steering patterns available on

your quatix device from your autopilot.

• To take the helm and place the autopilot in standby mode,

select MOB.

Boat Data

Streaming Boat Data

You can stream data fields from your compatible chartplotter to

your quatix device. The device displays up to three data fields

per page, and up to six pages of data.

From the watch face, select MOB > Boat Data.

Bring your quatix device within 3 m (10 ft.) of the chartplotter.

Set the chartplotter to enter pairing mode.

See your chartplotter owner's manual for more information.

If necessary, on the quatix device, select MOB to modify a

data page.

After the devices are paired, they connect automatically when

they are turned on, within range, and the app is open on the

watch. If you need to pair with another chartplotter, in the boat

data app, hold MENU and select Pair New.

Marking a Waypoint on Your Chartplotter

You can mark a waypoint on your compatible chartplotter using

your quatix device.

From the watch face, select MOB > Boat Data.

Select MOB > Mark Plotter Wpt.

GNT

™

Streaming GNT 10 Data

Before you can stream data fields from your compatible GNT 10

transceiver to your quatix device, you must download the GNT

10 app (Connect IQ Features, page 13).

From the watch face, select MOB > GNT 10.

Bring your quatix device within 3 m (10 ft.) of the transceiver.

Set the transceiver to enter pairing mode.

See your transceiver owner's manual for more information.

If necessary, on the quatix device, select MOB to modify a

data page.

The quatix device displays up to three data fields per page, and

up to six pages of data. After the devices are paired, they

connect automatically when they are turned on, within range,

and the app is open on the watch.

TIP: To pair your quatix device with another transceiver, from

the GNT 10 app, hold MENU and select Pair New.

4 Marine Activities

Error in tide data : since a few days, I find a mistake of approximately 2 hours for the hours of the local tide Submitted on 23-2-2022 at 11:34
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Quatix 6 in the language / languages: English as an attachment in your email.

The manual is 3,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Quatix 6

Garmin Quatix 6 User Manual - German - 68 pages

Garmin Quatix 6 User Manual - Dutch - 64 pages

Garmin Quatix 6 User Manual - French - 68 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin Quatix 6 Manual

Product: