691036
18
Zoom out
Zoom in
Previous page
1/30
Next page
and allow the readings to stabilize after significant changes in
environmental conditions. Always allow a margin of safety for
changing conditions and reading errors. Failure to account for
your vehicle and your environment could cause an incident
resulting in death or serious injury.
The device alerts you if your vehicle pitches or rolls at an angle
that could affect the vehicle's stability.
Calibrating Pitch and Roll
You can set the angle of your vehicle to zero at any time.
1
Park your vehicle on a flat, level surface.
2
Adjust the position of your device in the mount so you can
comfortably view the screen.
3
Select > > Pitch and Roll > Calibrate.
The values for pitch and roll reset to 0 degrees.
WARNING
To maintain the best accuracy, you must calibrate pitch and roll
each time you reposition your device.
Adjusting Warning Angles
You can adjust the angles at which the device activates a pitch
or roll alert. You are responsible for knowing and setting the
correct pitch and roll angle for your vehicle.
1
Select > > Pitch and Roll > > Warning Angles.
2
Swipe up or down to adjust the pitch or roll warning angles.
3
Select Accept.
Enabling or Disabling Warning Angle Alerts
1
Select > > Pitch and Roll > .
2
Select an option:
To enable or disable pitch and roll notifications, select
Pitch and Roll Notifications.
To enable or disable audible alerts, select Audible Alerts.
Viewing the Altimeter, Barometer, and
Compass
The device contains internal altimeter, barometer, and compass
sensors with automatic calibration.
Select > > ABC.
Calibrating the Compass
NOTICE
Calibrate the electronic compass outdoors. To improve heading
accuracy, do not stand near metal objects or objects that
influence magnetic fields, such as vehicles, electronic devices,
buildings, or overhead power lines.
When your device is connected to the magnetic mount, it uses
GPS data to determine your compass heading. When you
remove the device from the magnetic mount, it uses a built-in
compass to show your heading.
Each time you disconnect your device from the magnetic mount,
the device prompts you to calibrate the compass. If you
experience irregular compass behavior, for example, after
moving long distances or after extreme temperature changes,
you can manually calibrate the compass to improve accuracy.
1
Disconnect the device from the magnetic mount and move
away from objects that influence magnetic fields.
2
Select > Calibrate Compass.
3
Follow the on-screen instructions.
inReach Remote
The inReach remote function allows you to control your inReach
device using your Overlander device. You can send messages,
view weather reports, trigger an SOS alert, and more. Go to
buy.garmin.com to purchase an inReach device.
Connecting an inReach Device
1
Bring the inReach device within 3 m (10 ft.) of your
Overlander device.
2
On your Overlander device, select .
3
Select the Explore tab.
4
Select inReach.
5
Follow the on-screen instructions on your Overlander device
to complete the pairing process.
After the pairing process is complete, the inReach and
Overlander devices connect automatically when they are within
range.
Sending an inReach Message
Before you can send an inReach message using your
Overlander device, you must pair it with a compatible inReach
device (Connecting an inReach Device, page 14).
You can use your device to send inReach messages to your
contacts.
1
Select > > inReach > .
2
Select to add one or more contacts.
3
Enter a message.
4
Select Send.
SOS
During an emergency, you can contact the GEOS International
Emergency Rescue Coordination Center (IERCC) to request
help. Pressing the SOS button sends a message to the rescue
coordination center, and they notify the appropriate emergency
responders of your situation. You can communicate with the
rescue coordination center during your emergency while you
wait for help to arrive. You should only use the SOS function in a
real emergency situation.
Initiating an SOS Rescue
Before you can initiate an SOS rescue using your Overlander
device, you must pair it with a compatible inReach device
(Connecting an inReach Device, page 14).
NOTE: While in SOS mode, the inReach device cannot be
turned off.
1
Select > > inReach > > SOS.
2
Slide the SOS icon to the right.
3
Wait for the SOS countdown.
The device sends a default message to the emergency
response service with details about your location.
4
Reply to the confirmation message from the emergency
response service.
Your reply lets the emergency response service know that
you are capable of interacting with them during the rescue.
For the first 10 minutes of your rescue, an updated location is
sent to the emergency response service every minute. To
conserve battery power after the first 10 minutes, an updated
location is sent every 10 minutes when moving, and every 30
minutes when stationary.
Canceling an SOS Rescue
If you no longer need assistance, you can cancel an SOS
rescue after it is sent to the emergency response service.
Select Cancel SOS > Cancel SOS.
14 inReach Remote
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Overlander at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Overlander in the language / languages: English as an attachment in your email.

The manual is 3,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Overlander

Garmin Overlander User Manual - German - 32 pages

Garmin Overlander User Manual - Dutch - 32 pages

Garmin Overlander User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info