Manual Garmin Oregon 700 series (page 11 of 24) (English)

657439

Zoom out

Zoom in

1/24

• Select and to zoom in and out of the map.

• Select a location on the map (represented by a pin), and

select the information bar at the top of the screen to view

information about the selected location.

Navigating Using TracBack

While navigating, you can navigate back to the beginning of your

activity. This can be helpful when finding your way back to camp

or the trail head.

From the app drawer, select Activity History > Current

Activity > > TracBack.

The map displays your route with a magenta line, start point,

and end point.

Navigate using the map or the compass.

Finding a Location Near Another Location

From an activity screen, select > > Search Near.

Select an option.

Select a location.

Optional Maps

You can use additional maps with the device, such as BirdsEye

satellite imagery, BlueChart

g2, and City Navigator

detailed

maps. Detailed maps may contain additional points of interest,

such as restaurants or marine services. For more information,

go to http://buy.garmin.com or contact your Garmin dealer.

Finding an Address

You can use optional City Navigator maps to search for

addresses (Optional Maps, page 7).

From the app drawer, select Where To? > Addresses.

Select the country or state, if necessary.

Enter the city or postal code.

NOTE: Not all map data provides postal code searching.

Select the city.

Enter the house number.

Enter the street.

Navigating with the Compass

When navigating to a destination, points to your destination,

regardless of the direction you are moving.

Begin navigating to a destination (Navigating to a

Destination, page 6).

From the app drawer, select Compass.

Turn until points toward the top of the compass, and

continue moving in that direction to the destination.

Calibrating the Compass

NOTICE

Calibrate the electronic compass outdoors. To improve heading

accuracy, do not stand near objects that influence magnetic

fields, such as vehicles, buildings, and overhead power lines.

Your device was already calibrated at the factory, and the

device uses automatic calibration by default. If you experience

irregular compass behavior, for example, after moving long

distances or after extreme temperature changes, you can

manually calibrate the compass.

From the app drawer, select Compass.

Select > Calibrate Compass > Start.

Follow the on-screen instructions.

Course Pointer

The course pointer is most useful when you are navigating to

your destination in a straight line, such as when you are

navigating on water. It can help you navigate back to the course

line when you go off-course to avoid obstacles or hazards.

To enable the course pointer, from the app drawer, select Setup

> Heading > Go To Line (Pointer) > Course (CDI).

Course line pointer. Indicates the direction of the desired course line

from your starting point to your next waypoint.

Course deviation indicator (CDI). Indicates the location of the

desired course line in relation to your location. If the CDI is aligned

with the course line pointer, you are on course.

Course deviation distance. The dots indicate your distance off

course. The distance represented by each dot is indicated by the

scale in the upper-right corner.

To-and-from indicator. Indicates whether you are headed to or from

the next waypoint.

Marking and Starting Navigation to a Man

Overboard Location

You can save a man overboard (MOB) location, and

automatically start navigation back to it.

From the app drawer, select Man Overboard > Start.

The map opens showing the route to the MOB location. The

default appearance of the route is a magenta line.

Navigate using the map (Navigating with the Map, page 6) or

compass (Navigating with the Compass, page 7).

Navigating with Sight 'N Go

You can point the device at an object in the distance with the

compass direction locked in, project the object as a waypoint,

and navigate using the object as a reference point.

From the app drawer, select Sight 'N Go.

Point the device at an object.

Select Lock Direction > Set Course.

Navigate using the compass.

Elevation Plot

By default, the elevation plot displays the elevation over the

distance traveled. The top chart displays the full track, and the

bottom chart can display a portion of the track. You can touch

any point on either chart to view details about that point. You

can customize the elevation settings (Altimeter Settings,

page 13).

Navigating to a Point on the Elevation Plot

From the app drawer, select Altimeter.

Select an individual point on the plot.

Select .

Select View Map.

Navigate using the map (Navigating with the Map, page 6) or

compass (Navigating with the Compass, page 7).

Changing the Plot Type

You can change the elevation plot to display pressure and

elevation over time or distance.

From the app drawer, select Altimeter.

Select > Altimeter Setup > Plot Type

Navigation 7

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Oregon 700 series in the language / languages: English as an attachment in your email.

The manual is 3,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Oregon 700 series

Garmin Oregon 700 series User Manual - German - 28 pages

Garmin Oregon 700 series User Manual - Dutch - 26 pages

Garmin Oregon 700 series User Manual - French - 28 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin Oregon 700 series Manual

Product: