740418
10
Zoom out
Zoom in
Previous page
1/34
Next page
Set Scale: Sets the scale for the distance between the dots on
the course deviation indicator.
Calibrate Compass: Allows you to calibrate the compass if you
experience irregular compass behavior, for example, after
moving long distances or after extreme temperature changes
(Calibrating the Compass, page 6).
Heading Setup: Allows you to customize the compass heading
settings (Heading Settings, page 6).
Lock Data Fields: Locks the data fields. You can unlock the
data fields to customize them.
Restore Defaults: Restores the compass to factory default
settings.
Navigating with Sight 'N Go
You can point the device at an object in the distance with the
compass direction locked in, project the object as a waypoint,
and navigate using the object as a reference point.
1
From the compass, select > Sight 'N Go.
2
Point the device at an object.
3
Select Lock Direction > Set Course.
4
Navigate using the compass.
Calibrating the Compass
Before you can calibrate the electronic compass, you must be
outdoors, away from objects that influence magnetic fields, such
as cars, buildings, or overhead power lines.
The device has a 3-axis electronic compass. You should
calibrate the compass after moving long distances or
experiencing temperature changes.
1
From the compass, select .
2
Select Calibrate Compass > Start.
3
Follow the on-screen instructions.
Heading Settings
From the compass, select , and select Heading Setup.
Display: Sets the type of directional heading shown on the
compass.
North Reference: Sets the north reference used on the
compass.
Go To Line (Pointer): Sets the behavior of the pointer that
appears on the map. Bearing points in the direction of your
destination. Course (CDI) shows your relationship to the
course line leading to the destination.
Compass: Automatically switches from an electronic compass
to a GPS compass when you are traveling at a higher rate of
speed for a period of time.
Calibrate Compass: Allows you to calibrate the compass if you
experience irregular compass behavior, for example, after
moving long distances or after extreme temperature changes
(Calibrating the Compass, page 6).
Course Pointer
The course pointer is most useful when you are navigating to
your destination in a straight line, such as when you are
navigating on water. It can help you navigate back to the course
line when you go off-course to avoid obstacles or hazards.
To enable the course pointer, from the compass, select >
Heading Setup > Go To Line (Pointer) > Course (CDI).
Course line pointer. Indicates the direction of the desired course
line from your starting point to your next waypoint.
Course deviation indicator (CDI). Indicates the location of the
desired course line in relation to your location. If the CDI is aligned
with the course line pointer, you are on course.
Course deviation distance. The dots indicate your distance off
course. The distance represented by each dot is indicated by the
scale in the upper-right corner.
To-and-from indicator. Indicates whether you are headed to or from
the next waypoint.
Trip Computer
The trip computer displays your current speed, average speed,
trip odometer, and other helpful statistics. You can customize
the trip computer layout, dashboard, and data fields.
Trip Computer Settings
From the trip computer, select .
Reset: Resets all the trip computer values to zero. For accurate
information, reset the trip information before beginning a trip.
Change Dashboard: Changes the theme and information
displayed on the dashboard.
NOTE: Your customized settings are remembered by the
dashboard. Your settings are not lost when you change
profiles (Profiles, page 21).
Lock Data Fields: Locks the data fields. You can unlock the
data fields to customize them.
Insert Page: Inserts an additional page of customizable data
fields.
Remove Page: Removes an additional page of customizable
data fields.
More Data: Adds additional data fields to the trip computer.
Less Data: Removes data fields from the trip computer.
Restore Defaults: Restores the trip computer to its factory
default settings.
Altimeter
By default, the altimeter plot displays the elevation over the
distance traveled. You can customize the altimeter settings
(Altimeter Settings, page 6). You can select any point on the
plot to view details about that point.
You can customize the favorites bar to add the altimeter page
(Customizing the Favorites Bar, page 21).
Altimeter Plot Settings
From the altimeter, select .
Reset: Resets the altimeter data, including waypoint, track, and
trip data.
Altimeter Setup: Enables you to open additional altimeter
settings (Altimeter Settings, page 6).
Restore Defaults: Restores the altimeter to factory default
settings.
Altimeter Settings
From the altimeter, select > Altimeter Setup.
Auto Calibration: Once allows the altimeter to automatically
calibrate one time when you start an activity. Continuous
allows the altimeter to calibrate throughout the duration of
your activity.
Barometer Mode: Variable Elevation allows the barometer to
measure changes in elevation while you are moving. Fixed
Elevation assumes the device is stationary at a fixed
elevation, so the barometric pressure should only change
due to weather.
Pressure Trending: Sets how the device records pressure
data. Save Always records all pressure data, which can be
helpful when you are watching for pressure fronts.
6 Viewing the Main Pages
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Montana 700 serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Montana 700 serie in the language / languages: English as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Montana 700 serie

Garmin Montana 700 serie User Manual - German - 38 pages

Garmin Montana 700 serie User Manual - Dutch - 36 pages

Garmin Montana 700 serie User Manual - French - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info