740418
6
Zoom out
Zoom in
Previous page
1/34
Next page
2
Plug the small end of the USB cable into the USB port on
your device.
3
Plug the large end of the USB cable into an AC adapter or a
computer USB port.
4
If necessary, plug the AC adapter into a standard wall outlet.
When you connect the device to a power source, the device
turns on.
5
Charge the battery completely.
TIP: The battery gauge appears in the status bar.
Saving Energy While Charging the Device
1
Connect your device to an external power source.
2
Hold the power button until the screen turns off.
The device goes into a low power, battery charging mode,
and the battery gauge appears.
3
Charge the device completely.
Long-Term Storage
When you do not plan to use the device for several months, you
should charge the battery to at least 50% before you store the
device. You should store the device in a cool, dry place with
temperatures around the typical household level. After storage,
you should fully recharge the device before using it.
Using the Power Button
By default, you can use the power button to turn the device on
and off, turn off the screen, and open the status page. You can
customize the power button functions (Customizing the Power
Button, page 19).
Press to turn on the device.
Press to open the status page.
Press twice to turn off the screen.
TIP: You can press to turn the screen back on.
Hold to turn off the device.
Viewing the Status Page
The status page displays the current activity recording,
Bluetooth
®
and WiFi
®
connection status, and provides quick
access to frequently used functions such as marking waypoints,
locking the touchscreen, and adjusting the backlight brightness.
Press or swipe down from the top of the screen to open
the status page.
Adjusting the Backlight
Extensive use of screen backlighting can significantly reduce
battery life. You can adjust the backlight brightness to maximize
the battery life.
NOTE: The backlight brightness may be limited when the
remaining battery power is low.
1
Press to open the status page.
2
Use the slider to adjust the backlight brightness.
Using the Touchscreen
Tap the screen to select an item.
Make each touchscreen selection a separate action.
Select to save your changes and close the page.
Select to close the page.
Select to return to the previous page.
Select to return to the main menu.
Select to view specific menu items for the page you are
viewing.
Locking the Touchscreen
You can lock the screen to prevent inadvertent screen touches.
1
Press to open the status page.
2
Select .
Unlocking the Touchscreen
Press .
Activating the Device
WARNING
Before you can use the inReach features of your Montana 700i/
750i device, you must activate it (inReach Features, page 3).
1
Create an account, and select a satellite subscription at
explore.garmin.com.
2
Turn on the device.
3
Select Next.
4
Follow the on-screen instructions.
NOTE: You must enter the device IMEI number and
authorization code to complete the online portion of activation
before you go outdoors.
5
Go outdoors to an open area with a clear view of the sky, and
point the antenna on the device toward the sky for optimal
performance.
6
Wait while the device communicates with the Iridium satellite
network.
NOTE: It may take up to 20 minutes to activate your device.
The device must send and receive several messages, which
takes longer than sending a single message during regular
use. You should remain outdoors until activation completes.
Iridium Satellite Network
Your device requires a clear view of the sky to transmit
messages and track points over the Iridium satellite network.
Without a clear view of the sky, your device attempts to send the
information until it acquires satellite signals.
TIP: For the best connection with satellites, hold the device with
the antenna pointed toward the sky.
Acquiring Satellite Signals
It may take 30 to 60 seconds to acquire satellite signals.
1
Go outdoors to an open area.
2
If necessary, turn on the device.
3
Wait while the device searches for satellites.
flashes while the device determines your GNSS location.
in the status bar shows the satellite signal strength.
When the device acquires satellite signals, it automatically starts
recording your path as an activity.
Status Icons
ANT+
®
sensor status
GPS signal strength
Charging battery
2 Introduction
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin Montana 700 serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin Montana 700 serie in the language / languages: English as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin Montana 700 serie

Garmin Montana 700 serie User Manual - German - 38 pages

Garmin Montana 700 serie User Manual - Dutch - 36 pages

Garmin Montana 700 serie User Manual - French - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info