Manual Garmin MARQ Captain (page 9 of 58) (English)

692308

Zoom out

Zoom in

1/58

NOTE: When the burn time is negative, you will arrive at the

start line after the race starts. When the burn time is positive,

you will arrive at the start line before the race starts.

Select START to start the timer.

Setting the Sailing Units

From the watch face, select START > Sail Race.

Hold MENU.

Select the activity settings.

Select Nautical Units.

Select an option:

• To use nautical units for speed and distance, select On.

• To use the system units of measure for speed and

distance, select Use Sys. Settings.

Tides

Viewing the Tide Data

When you pair your device with a smartphone, you can

download up to seven days of tide data for your current location.

You can update your location and download new tide data by

selecting START from the tide screen.

From the watch face, select START > Tides.

A 24-hour tide chart appears, showing the high tides and

low tides for the current date.

Select UP or DOWN to view the tide data from other days.

Anchor

Marking Your Anchor Location

From the watch face, select START > Anchor.

Select START > Drop Anchor.

Anchor Settings

Select START > Anchor > START.

Drift Radius: Sets the allowable drift distance while anchored.

Update interval: Sets the time interval for updating anchor data.

Anchor Assist Settings

From the anchor assist screen, select START.

Scope: Sets the first number in the anchor scope ratio. The ratio

is the length of anchor rode in use to the vertical distance

from the bow of the boat to the bottom of the water.

Depth: Sets the depth of the water.

Bow Offset: Sets the distance between the bow of your boat

and the location of your GPS antenna.

Autopilot

WARNING

You are responsible for the safe and prudent operation of your

vessel. The autopilot is a tool that enhances your capability to

operate your boat. It does not relieve you of the responsibility of

safely operating your boat. Avoid navigational hazards and

never leave the helm unattended.

Always be prepared to promptly regain manual control of your

boat.

Learn to operate the autopilot on calm and hazard-free open

water.

Use caution when operating the autopilot near hazards in the

water, such as docks, pilings, and other boats.

Pairing With an Autopilot

From the watch face, select START > Autopilot > START.

Bring your MARQ device within 3 m (10 ft.) of the marine

device.

Set your compatible Garmin autopilot helm control to search

for a remote control.

See your autopilot helm control owner's manual for more

information.

After you pair the devices, they connect automatically when

turned on, within range, and the app is open on the watch. If you

need to pair with another autopilot helm control, in the autopilot

app, hold MENU and select Settings > Pair New.

Controlling the Autopilot

From the watch face, select START > Autopilot.

Select an option:

• To engage the autopilot heading hold, hold a steady

course, select START, and release the helm.

• To change the heading, with the autopilot engaged, select

UP for starboard and DOWN for port.

• To change the steering mode, hold MENU, select

Steering Mode, and select an option.

• To perform a steering pattern, hold MENU, select Pattern

Steering, and select a pattern.

NOTE: You can change the steering patterns available on

your MARQ device from your autopilot.

• To take the helm and place the autopilot in standby mode,

select STOP.

Boat Data

Streaming Boat Data

You can stream data fields from your compatible chartplotter to

your MARQ device. The device displays up to three data fields

per page, and up to four pages of data.

From the watch face, select START > Boat Data.

Bring your MARQ device within 3 m (10 ft.) of the chartplotter.

Set the chartplotter to enter pairing mode.

See your chartplotter owner's manual for more information.

If necessary, on the MARQ device, select START to modify a

data page.

After the devices are paired, they connect automatically when

they are turned on, within range, and the app is open on the

watch. If you need to pair with another chartplotter, in the boat

data app, hold MENU and select Pair New.

Marking a Waypoint on Your Chartplotter

You can mark a waypoint on your compatible chartplotter using

your MARQ device.

From the watch face, select START > Boat Data.

Select START > Mark Plotter Wpt.

FUSION-Link Lite

™

App

You can use the FUSION-Link Lite app on your MARQ device to

control the audio playback on your FUSION

device.

Connecting to a FUSION Stereo

Set the FUSION stereo to be discoverable.

See your stereo owner's manual for more information.

Bring your MARQ device within 3 m (10 ft.) of the stereo.

Marine Activities 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin MARQ Captain in the language / languages: English as an attachment in your email.

The manual is 4,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin MARQ Captain

Garmin MARQ Captain User Manual - German - 64 pages

Garmin MARQ Captain User Manual - Dutch - 62 pages

Garmin MARQ Captain User Manual - French - 64 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin MARQ Captain Manual

Product: