522248
123
Zoom out
Zoom in
Previous page
1/130
Next page
10.7
Chapter 10 Setting Connection and Network Preferences
Creating a Login Script
A login script is a series of commands that automates logging into your ISP. You can create login script files by selecting
commands from in the Login Script dialog box. Some commands, such as Send, require additional information and have a
parameter field to add the necessary data. You can also use non-ASCII and literal characters in your login script. See “Using non-
ASCII Characters in Login Scripts” for more information.
To create a login script:
1. With a service template selected in the Network Preferences screen, tap
Details.
2. In the Details dialog box, tap
Script.
3. In the Login Script screen, tap the
End pick list.
4. In the pick list, tap any of the following commands to select them, and then enter additional information if a field ap
-
pears:
Wait For: to instruct your handheld to wait for specific characters from the TCP/IP server before executing the next
command.
Send: to transmit specific characters to the TCP/IP server to which you are connecting.
Send CR: to transmit a carriage return or LF character to the TCP/IP server to which you are connecting.
Send User ID: to transmit the User ID information entered in the User ID field of the Network Preferences screen.
Send Password: to transmit the password entered in the Password field of the Network Preferences screen. If
you did not enter a password, this command prompts you to enter one. The Password command is usually fol
-
lowed by a Send CR command.
Delay: to instruct your handheld to wait a specific number of seconds before executing the next command in the
login script.
Get IP (for SLIP connections): to read an IP address and uses it as the IP address for your handheld.
Prompt: to open a dialog box and prompts you to enter text of some kind (for example, a password or a security
code).
End: to identify the last line in the login script.
5. Repeat steps 2 and 3 until you have completed the login script.
6. Tap
OK, and then tap OK in the Details dialog box.
Setting Network Preferences
123


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin iQue 3200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin iQue 3200 in the language / languages: English as an attachment in your email.

The manual is 2,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info