657447

Garmin inReach Explorer Manual

10
Zoom out
Zoom in
Previous page
1/20
Next page
Use the Stop Navigating button on the Routes list to close your current route.
Settings Page
Configure your personal preferences on the Settings page.
Display – Turn Screen Lock on or o!, choose the Dark color scheme to preserve your night vision, increase the
display brightness for better screen visibility, or adjust the timeout of the display screen.
Tip: Keep the Screen Lock turned on to prevent accidental button presses in your pack.
Map – Set the orientation of your map to rotate as your heading changes or to remain North up; auto zoom to
resize the map area to best fit your location and your destination; choose whether Messages, Track Points,
and/or the Track Line show up on the Map page.
Tracking – Choose how frequently Track Points are sent to the Explore website via satellite. Choose a time
interval between 10 minutes and 4 hours. Extreme Plan users have additional interval options of 2 and 5
minutes.
Choose how frequently Track Points are logged on the inReach device. There are two Tracking Log intervals:
While Sending and Logging Only.
Configure the While Sending interval to control how frequently Track Points are stored on the device
while you are sending track points to the Explore and MapShare sites.
Configure the Logging Only interval to control how frequently log points are stored on the device even
when the Track Points aren’t being transmitted via satellite to the Explore site. The Logging Only
interval defaults to always log track points, but you have the option to turn it o!.
Tip: Set your Tracking Log interval to more than 30 seconds to conserve battery power.
Prompt for MapShare – A prompt reminds you to send your MapShare link to your contacts each time you
start tracking. Disable this option in Settings>Tracking. Once you disable it, you can no longer send your
MapShare link until you re-enable it.
Bluetooth – Enable and disable the Bluetooth antenna, pair your inReach with your mobile device, or see which
mobile device is connected.
Compass & Altimeter – Calibrate your compass, enable auto-calibrate on the altimeter, or calibrate your
altimeter manually.
Messages – Choose a time interval for the inReach to check for new messages. Set the device to ring until a
new message is read.
Note: Shorter intervals use more battery.
Sounds – Change the default sounds that play for sending and receiving messages, announcing critical alerts,
and powering o! the device; or choose to Mute All sounds.
Time – Choose 12- or 24-hour time format, specify your Time Zone, and select Daylight Savings status.
Tip: Remember to set your Daylight Savings status seasonally! It will not update automatically.
Units – Change the coordinates displayed by the device. Select between miles, kilometers, and nautical units of
measurement. The inReach Explorer uses the WGS84 Datum and is not configurable.
Power – Choose to have the device turn on or o! automatically when external power is connected or
disconnected.
Owner Info – Enter your personal information and choose to Display Info at startup. This information appears
when your inReach Explorer turns on.
About This Device – View important information including your IMEI Number, Authorization Code, and
Firmware Version.
Restore Factory Settings – Reset your inReach Explorer to the state it was in when you first took it out of the
box new. DO NOT use this setting unless you are prepared to lose all of your messages, track points, contacts,
and settings.
Social Page
Send messages to Facebook, Twitter, and your MapShare page on the Social page.
Tip: Add your Facebook and Twitter account information on the Explore website for this feature to work
properly.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin inReach Explorer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin inReach Explorer in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info