691425
35
Zoom out
Zoom in
Previous page
1/80
Next page
Fish
Bottom
RealVü 3D Historical Sonar View
This sonar view provides a three-dimensional view of what is
behind your boat as you are moving and shows the entire water
column in 3D, from the bottom to the top of the water. This view
is used for finding fish.
Color legend
Boat
Range
Bottom
Structure
Fish
FrontVü Sonar View
The Panoptix FrontVü sonar view increases your situational
awareness by showing obstructions under the water, up to
91 meters (300 feet) in front of the boat.
The ability to effectively avoid forward collisions with FrontVü
sonar decreases as your speed rises above 8 knots.
To see the FrontVü sonar view, you must install and connect a
compatible transducer, such as a PS21 transducer. You may
need to update the transducer software.
Panoptix LiveScope Sonar View
This sonar view shows a live view of what is in front of or below
the boat and can be used to see fish and structures.
Depth information
Suspended targets or fish
Bottom of the body of water
Selecting the Transducer Type
Before you can select the transducer type, you must know what
kind of transducer you have.
This chartplotter is compatible with a range of accessory
transducers, including the Garmin ClearVü
transducers, which
are available at garmin.com/transducers.
If you are connecting a transducer that was not included with the
chartplotter, you may need to set the transducer type to make
the sonar function properly.
1
From a sonar view, select Menu > Sonar Setup >
Installation > Transducer Models.
2
Select the transducer to change.
3
Select an option:
If your transducer is listed, select it from the list.
If you have a 200/77 kHz, dual-beam transducer, select
Dual Beam (200/77 kHz).
If you have a 200/50 kHz, dual-frequency transducer,
select Dual Freq (200/50 kHz).
Selecting a Sonar Source
This feature may not be available with all models.
When you are using more than one sonar data source for a
particular sonar view, you can select the source to use for that
sonar view. For example, if you have two sources for Garmin
ClearVü, you can select the source to use from the Garmin
ClearVü sonar view.
1
Open the sonar view for which you will change the source.
2
Select Menu > Sonar Setup > Source.
3
Select the source for this sonar view.
Renaming a Sonar Source
You can rename a sonar source to easily identify that source.
For example, you use "Bow" as the name of the transducer on
the bow of your boat.
To rename a source, you must be in the applicable sonar view
for the source. For example, to rename the Garmin ClearVü
sonar source, you must open the Garmin ClearVü sonar view.
1
From the sonar view, select Menu > Sonar Setup > Source
> Rename Sources.
2
Enter the name.
Creating a Waypoint on the Sonar Screen
1
From a sonar view, drag the screen or select .
2
Select a location.
3
Select .
4
If necessary, edit the waypoint information.
Pausing the Sonar Display
From a sonar view, select .
Viewing Sonar History
You can scroll the sonar display to view historical sonar data.
NOTE: Not all transducers save historical sonar data.
1
From a sonar view, drag the screen to the right.
2
Select Back to exit history.
Sonar Sharing
You can view the sonar data from all compatible sources on the
Garmin Marine Network. You can view sonar data from a
compatible external sonar module, such as a GCV
sonar
module. In addition, you can view the sonar data from other
chartplotters that have a built-in sonar module.
Sonar Fishfinder 27
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 8700 SERIE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 8700 SERIE in the language / languages: English as an attachment in your email.

The manual is 7,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPSMAP 8700 SERIE

Garmin GPSMAP 8700 SERIE Installation Guide - English - 6 pages

Garmin GPSMAP 8700 SERIE Installation Guide - German - 8 pages

Garmin GPSMAP 8700 SERIE User Manual - German - 92 pages

Garmin GPSMAP 8700 SERIE User Manual - Dutch - 236 pages

Garmin GPSMAP 8700 SERIE Installation Guide - Dutch - 8 pages

Garmin GPSMAP 8700 SERIE User Manual - Dutch - 88 pages

Garmin GPSMAP 8700 SERIE Installation Guide - French - 8 pages

Garmin GPSMAP 8700 SERIE User Manual - French - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info