658282
57
Zoom out
Zoom in
Previous page
1/64
Next page
Item Description
À
GPSMAP
8400/8600 Series chartplotter
Á
Computer
Â
GPSMAP
USB cable
Ã
Dry environment, protected from moisture
Ä
GPSMAP
HDMI cable (HDMI IN)
Controlling a Computer with the Chartplotter
Before you can control a computer using the chartplotter, you
must connect the chartplotter and computer correctly. See the
chartplotter installation instructions for connection information.
1
Select A/V, Gauges, Controls > Video.
2
Select the HDMI source for the computer.
3
Select Menu
> USB Touch Out
.
You can now control your computer using two-finger touch
gestures on the chartplotter screen.
4
If necessary, select Menu
> Full Screen
to view the
computer screen in full screen mode.
TIP:
To exit full screen mode, press
.
Pairing the GRID Remote Input Device with
the Chartplotter
Before you can use a GRID
remote input device with a
chartplotter, you must pair the devices.
You can initiate the paring of the devices from the chartplotter or
from the GRID remote input device.
Pairing the GRID
Device with the Chartplotter from
the Chartplotter
1
Select Settings > System >
Station Information > GRID™
Pairing > Add
.
2
On the
GRID remote input device, press SELECT.
Pairing the GRID
Device with the Chartplotter from
the GRID Device
1
On the GRID remote input device, press +
and HOME at the
same time.
A selection page opens on all of the chartplotters on the
Garmin Marine Network.
2
Rotate the wheel on the
GRID remote input device to
highlight Select on the chartplotter you want to control with
the GRID remote input device.
3
Press
SELECT.
Rotating the GRID
Joystick
For certain installation situations, you can rotate the orientation
of the GRID
joystick.
1
Select Settings >
Communications > Marine Network
.
2
Select the
GRID device.
Cleaning the Screen
NOTICE
Cleaners containing ammonia will harm the anti-reflective
coating.
The device is coated with a special anti-reflective coating which
is very sensitive to waxes and abrasive cleaners.
1
Apply an eyeglass lens cleaner specified as safe for anti-
reflective coatings to the cloth.
2
Gently wipe the screen with a soft, clean, lint-free cloth.
Viewing Images on a Memory card
You can view images that are saved on a memory card. You
can view .jpg, .png, and .bmp files.
1
Insert a memory card with image files into the card slot.
2
Select Info
> Image Viewer
.
3
Select the folder containing the images.
4
Wait a few seconds for the thumbnail images to load.
5
Select an image.
6
Use the arrows to scroll through the images.
7
If necessary, select Menu
> Start Slideshow
.
Screenshots
You can capture a screenshot of any screen shown on your
chartplotter as a bitmap (.bmp) file. You can transfer the
screenshot to your computer. You can also view the screenshot
in the image viewer (
Viewing Images on a Memory card,
page 49)
.
Capturing Screenshots
1
Insert a memory card into the card slot.
2
Select Settings > Preferences > Screenshot Capture >
On.
3
Go to a screen you want to capture.
4
Hold Home
for at least six seconds.
Copying Screenshots to a Computer
1
Remove the memory card from the chartplotter, and insert it
into a card reader that is attached to a computer.
2
From
Windows
®
Explorer, open the Garmin\scrn folder on the
memory card.
3
Copy a .bmp file from the card and paste it to any location on
the computer.
Troubleshooting
My device will not acquire GPS signals
If the device is not acquiring satellite signals, there could be a
few causes. If the device has moved a large distance since the
last time it has acquired satellites or has been turned off for
longer than a few weeks or months, the device may not be able
to acquire the satellites correctly.
Ensure the device is using the latest software. If not, update
the device software (Software Update,
page
2).
If the device is using an internal GPS antenna, make sure the
device has a clear view of the sky so the internal antenna can
receive the GPS signal. If it is mounted inside of a cabin, it
should be close to a window so it can receive the GPS signal.
If the device is mounted inside a cabin and cannot be placed
in a location where the device can acquire satellites, use an
external GPS antenna.
If the device is using an external GPS antenna, make sure
the antenna is connected to the chartplotter or the NMEA
network.
If the device has more than one GPS antenna source, select
a different source
(
Selecting the GPS Source, page 2)
.
Appendix 49
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 8600 serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 8600 serie in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPSMAP 8600 serie

Garmin GPSMAP 8600 serie Installation Guide - English - 8 pages

Garmin GPSMAP 8600 serie Installation Guide - German - 10 pages

Garmin GPSMAP 8600 serie User Manual - German - 72 pages

Garmin GPSMAP 8600 serie Installation Guide - Dutch - 10 pages

Garmin GPSMAP 8600 serie User Manual - Dutch - 68 pages

Garmin GPSMAP 8600 serie User Manual - French - 242 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info