658282
50
Zoom out
Zoom in
Previous page
1/64
Next page
2
Select an option:
To turn off the audio, select Off.
The icon appears on the video screen.
To play the HDMI audio, select On
.
The
icon appears on the video screen.
To always play the HDMI audio, even when you are not
viewing the HDMI video, select Always On
.
The
icon appears on the video screen.
Device Configuration
Turning On the Chartplotter Automatically
You can set the chartplotter to turn on automatically when the
power is applied. Otherwise, you must turn on the chartplotter by
pressing
.
Select Settings
> System > Auto Power Up
.
NOTE:
When Auto Power Up is On, and the chartplotter is
turned off using
, and power is removed and reapplied
within less than two minutes, you may need to press to
restart the chartplotter.
System Settings
Select
Settings
> System
.
Sounds and Display: Adjusts the display and audio settings.
GPS: Provides information about the GPS satellites and
settings.
System Information: Provides information about the devices on
the network and the software version.
Station Information: Adjusts the setup of the station.
Auto Power Up: Controls what turns on automatically when
power is applied.
Simulator: Turns the simulator on or off and allows you to set
the time, date, speed, and simulated location.
Sounds and Display Settings
Select Settings > System >
Sounds and Display
.
Beeper: Turns on and off the tone that sounds for alarms and
selections.
Backlight: Sets the backlight brightness. You can select the
Auto
option to adjust the backlight brightness automatically
based on the ambient light.
Backlight Sync: Synchronizes the backlight brightness of other
chartplotters in the station.
Color Mode: Sets the device to display day or night colors. You
can select the Auto option to allow the device to set day or
night colors automatically based on the time of day.
Video Out Aspect: Sets the video aspect ratio. The video
cannot stretch beyond the dimensions provided by the
connected video device, and it may not fill the entire screen.
Startup Image: Sets the image that appears when you turn on
the device.
GPS Settings
Select Settings >
System > GPS
.
Skyview: Shows the relative position of GPS satellites in the
sky.
Settings
> Speed Filter
: Averages the speed of your vessel
over a short period of time for smoother speed values.
Settings > WAAS/EGNOS: Turns on or off WAAS (in North
America) or EGNOS (in Europe), which can provide more-
accurate GPS position information. When using WAAS or
EGNOS, the device may take longer to acquire satellites.
Settings
> GLONASS
: Turns on or off GLONASS usage
(Russia satellite system). When the system is used in
situations with poor sky visibility, this configuration can be
used in combination with GPS to provide more accurate
position information.
Source: Allows you to select the preferred source for GPS.
Station Settings
Select Settings > System >
Station Information
.
Change Station: Sets the entire station to a new set of defaults
based on the location of this station. You can also select to
use this display as a stand-alone, individual display, instead
of grouping it with other displays to make a station.
GRID™ Pairing: Allows you to pair a GRID
remote input
device with this station.
Display Order: Sets the order of the displays, which is
important when using a GRID
remote input device.
Autopilot Enabled: Allows you to control the autopilot from this
device.
Reset Layouts: Restores the factory default view for the layouts
in this station.
Reset Stations: Restores the factory default layouts for all
displays in the station.
Viewing System Software Information
You can view the software version, the basemap version, all
supplemental map information (if applicable), the software
version for an optional Garmin
radar (if applicable), and the unit
ID number. You may need this information to update the system
software or to purchase additional map data information.
Select
Settings > System > System Information.
Viewing the Event Log
The event log shows a list of system events.
Select Settings > System > System Information > Event
Log.
Audio Settings
You can adjust audible alarms, alerts, and warnings that are
sounded over audio output devices connected through HDMI or
analog output using the NMEA
0183 audio cable.
Select
Settings
> System > Sounds and Display > Audio
Setup
.
Audio Output: Turns on audio for HDMI video and for audio
alerts.
Audio Alerts: Sets which system alarms and alerts are played
over the compatible audio output. The Alarm option indicates
a situation could be hazardous to passengers and requires
immediate action. The Warning option indicates the situation
could be hazardous to equipment on the vessel or the vessel
itself and requires action very soon. All other messages and
information are classified as alerts.
Audio Alert Device: Sets the
FUSION device to control when
alerts are played. You should select the device that is
connected to the chartplotter audio output.
Audio Alert Source: Switches the audio to the selected source
when an alert is played. You should select the device that is
connected to the chartplotter audio output.
Alert Volume: Controls the volume of the alerts.
Preferences Settings
Select
Settings
> Preferences
.
Units: Sets units of measure.
Language: Sets the on-screen text language.
Navigation: Sets navigation preferences.
42 Device Configuration
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 8600 serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 8600 serie in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPSMAP 8600 serie

Garmin GPSMAP 8600 serie Installation Guide - English - 8 pages

Garmin GPSMAP 8600 serie Installation Guide - German - 10 pages

Garmin GPSMAP 8600 serie User Manual - German - 72 pages

Garmin GPSMAP 8600 serie Installation Guide - Dutch - 10 pages

Garmin GPSMAP 8600 serie User Manual - Dutch - 68 pages

Garmin GPSMAP 8600 serie User Manual - French - 242 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info