737440
19
Zoom out
Zoom in
Previous page
1/28
Next page
Appearance: Changes the appearance of the display
background and selection highlight (Changing the Color
Mode, page 15).
Screen Capture: Allows you to save the image on the device
screen.
Review Text Size: Changes the size of the text on the screen.
Changing the Color Mode
1
Select Setup > Display > Appearance.
2
Select an option:
To allow the device to display day or night colors
automatically based on the time of day, select Mode >
Auto.
To use a light background, select Mode > Day.
To use a dark background, select Mode > Night.
To customize the color scheme for daytime, select Day
Color.
To customize the color scheme for nighttime, select Night
Color.
Bluetooth Settings
Select Setup > Bluetooth.
Status: Enables Bluetooth wireless technology, and shows
current connection status.
Notifications: Shows or hides smartphone notifications.
Forget Phone: Removes the connected device from the list of
paired devices. This option is available only after a device is
paired.
WiFi Settings
Select Setup > Wi-Fi.
Wi-Fi: Enables wireless technology.
Add Network: Allows you to scan for and connect to a wireless
network.
Routing Settings
The available routing settings vary based on the activity
selected.
Select Setup > Routing.
Direct Routing: Calculates the most direct route possible to the
destination.
Activity: Sets an activity for routing. The device calculates
routes optimized for the type of activity you are doing.
Calculation Method: Sets the method used to calculate your
route.
Lock On Road: Locks the blue triangle, which represents your
position on the map, onto the nearest road. This is most
useful when driving or navigating on roads.
Off Route Recalculation: Sets recalculation preferences when
navigating away from an active route.
Avoidance Setup: Sets the types of roads, terrain, and
transportation methods to avoid while navigating.
Route Transitions: Sets how the device routes from one point
on the route to the next. This setting is available only when
the Direct Routing option is enabled. The Distance option
routes you to the next point on the route when you are within
a specified distance of your current point.
Setting the Device Tones
You can customize tones for messages, keys, turn warnings,
and alarms.
1
Select Setup > Tones.
2
Select Sounds.
3
Select an option:
To enable both tones and vibration, select Tone &
Vibration.
To enable only tones, select Tone.
To enable only vibration, select Vibration.
4
Select Volume to set the tone volume.
5
Select a tone for each audible type.
Geocaching Settings
Select Setup > Geocaching.
Geocaching Live: Allows you to remove live geocache data
from your device and remove your device registration from
geocaching.com (Removing Live Geocache Data from the
Device, page 13, Removing Your Device Registration From
Geocaching.com, page 13).
Geocache Style: Sets the device to display the geocache list
using names or codes.
chirp™ Searching: Allows the device to search for a geocache
containing a chirp accessory (Enabling chirp Searching,
page 13).
Program chirp™: Programs the chirp accessory.
Filter Setup: Allows you to create and save custom filters for
geocaches (Saving a Custom Geocache Filter, page 12).
Found Geocaches: Allows you to edit the number of geocaches
found. This number automatically increases when you log a
find (Logging the Attempt, page 12).
Wireless Sensors
Your device can be used with wireless ANT+ or Bluetooth
sensors. For more information about compatibility and
purchasing optional sensors, go to buy.garmin.com.
Pairing Your Wireless Sensors
Before you can pair, you must put on the heart rate monitor or
install the sensor.
Pairing is the connecting of wireless sensors using ANT+ or
Bluetooth technology, for example, connecting a heart rate
monitor with your device.
1
Bring the device within 3 m (10 ft.) of the sensor.
NOTE: Stay 10 m (33 ft.) away from other sensors while
pairing.
2
Select Setup > Sensors.
3
Select your sensor type.
4
Select Search For New.
When the sensor is paired with your device, the sensor status
changes from Searching to Connected.
Fitness Settings
Select Setup > Fitness.
Auto Lap: Sets the device to automatically mark the lap at a
specific distance.
User: Sets your user profile information. The device uses this
information to calculate accurate training data in Garmin
Connect.
HR Zones: Sets the five heart rate zones and your maximum
heart rate for fitness activities.
Marking Laps by Distance
You can use Auto Lap
®
to automatically mark the lap at a
specific distance. This feature is helpful for comparing your
performance over different parts of an activity.
1
Select Setup > Fitness > Auto Lap.
2
Enter a value, and select Done.
Marine Settings
Select Setup > Marine.
Marine Chart Mode: Sets the type of chart the device uses
when displaying marine data. Nautical displays various map
Customizing the Device 15
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 86 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 86 in the language / languages: English as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPSMAP 86

Garmin GPSMAP 86 User Manual - German - 30 pages

Garmin GPSMAP 86 User Manual - Dutch - 30 pages

Garmin GPSMAP 86 User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info