658280
54
Zoom out
Zoom in
Previous page
1/64
Next page
Select Settings
> Other Vessels
.
AIS: Enables and disables AIS signal reception.
DSC: Enables and disables digital selective calling (DSC).
Collision Alarm: Sets the collision alarm (Setting the Safe-Zone
Collision Alarm, page 7).
AIS-EPIRB Test: Enables test signals from Emergency Position
Indicating Radio Beacons (EPRIB).
AIS-MOB Test: Enables test signals from man overboard (MOB)
devices.
AIS-SART Test: Enables test transmissions from Search and
Rescue Transponders (SART).
Settings that are Synced on the Garmin
Marine Network
The following devices sync certain settings when connected to
the Garmin Marine Network.
echoMAP
70 series
GPSMAP
507 series (software version 3.0 or later)
GPSMAP
701 series (software version 3.0 or later)
GPSMAP
702 series
GPSMAP
800 series
GPSMAP
902 series
GPSMAP
1000 series
GPSMAP
1002 series
GPSMAP
1202 series
GPSMAP
7400/7600 series
GPSMAP 8400/8600 series
The following settings are synced, if applicable, to the device.
Alarm Settings (also syncs alarm acknowledgment):
Arrival
Anchor Drag
Off Course
GPS Accuracy
Shallow Water
Deep Water (Not available in the GPSMAP 8400/8600
series)
Water Temp.
Contour (Not available in echoMAP 70s and GPSMAP
507/701 series)
Fish
Collision Alarm
General Settings:
Auto Guidance
Preferred Depth
Auto Guidance
Vertical Clearance
Beeper
Color Mode
Keyboard Layout
Language
Map Datum
North Reference
Position Format
System Units
Calibrate Water Speed
Radar Antenna Size
Chart Settings:
Chart Borders
Hazard Colors
Heading Line
Land POIs
Light Sectors
Navaid Size
Navaid Type
Photo Points
Preferred Depth
Shallow Shading
Service Points
Vessel Icon (Cannot be synced between all models)
Restoring the Original Chartplotter Factory
Settings
NOTE:
This procedure deletes all settings information you have
entered.
1
Select Settings > System >
System Information > Factory
Settings
.
2
Select an option.
Communication with Wireless Devices
The chartplotters can create a wireless network to which you
can connect wireless devices.
Connecting wireless devices allows you to use Garmin apps,
including BlueChart
Mobile and Garmin Helm
. See
www.garmin.com for more information.
WiFi
®
Network
Setting Up the WiFi
Wireless Network
The chartplotters can create a WiFi
network to which you can
connect wireless devices. The first time you access the wireless
network settings, you are prompted to set up the network.
1
Select Settings > Communications
> Wi-Fi® Network >
Wi-Fi® > On > OK
.
2
If necessary, enter a name for this wireless network.
3
Enter a password.
You will need this password to access the wireless network
from a wireless device. The password is case-sensitive.
Connecting a Wireless Device to the Chartplotter
Before you can connect a wireless device to the chartplotter
wireless network, you must configure the chartplotter wireless
network (Setting Up the
Wi
Fi Wireless Network, page
46).
You can connect multiple wireless devices to the chartplotter to
share data.
1
From the wireless device, turn on the WiFi
technology and
search for wireless networks.
2
Select the name of your chartplotter wireless network (Setting
Up the Wi
Fi Wireless Network, page
46).
3
Enter the network password.
Changing the Wireless Channel
You can change the wireless channel if you have trouble finding
or connecting to a device, or if you experience interference.
1
Select Settings
> Communications > Wi-Fi® Network >
Advanced > Channel
.
2
Enter a new channel.
You do not need to change the wireless channel of devices
connected to this network.
Changing the WiFi
Host
You can change which chartplotter is serving as the WiFi host.
The can be helpful if you are having trouble with WiFi
46 Communication with Wireless Devices
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 8424 MFD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 8424 MFD in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPSMAP 8424 MFD

Garmin GPSMAP 8424 MFD Installation Guide - English - 8 pages

Garmin GPSMAP 8424 MFD Installation Guide - German - 10 pages

Garmin GPSMAP 8424 MFD User Manual - German - 72 pages

Garmin GPSMAP 8424 MFD Installation Guide - Dutch - 10 pages

Garmin GPSMAP 8424 MFD User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info