Manual Garmin GPSMAP 8422 MFD (page 23 of 62) (English)

658522

Zoom out

Zoom in

1/62

Select an option:

• Select the time the active track began.

• Select

Entire Log.

Review the course indicated by the colored line.

Follow the colored line, steering to avoid land, shallow water,

and other obstacles.

Clearing the Active Track

Select Info > User Data > Tracks > Clear Active Track.

The track memory is cleared, and the active track continues

to be recorded.

Managing the Track Log Memory During Recording

Select Info >

User Data > Tracks > Active Track Options

Select Record Mode

Select an option:

• To record a track log until the track memory is full, select

Fill

• To continuously record a track log, replacing the oldest

track data with new data, select Wrap

Configuring the Recording Interval of the Track Log

You can indicate the frequency at which the track plot is

recorded. Recording more frequent plots is more accurate but

fills the track log faster. The resolution interval is recommended

for the most efficient use of memory.

Select Info

> User Data > Tracks > Active Track Options >

Interval > Interval

Select an option:

• To record the track based on a distance between points,

select Distance > Change, and enter the distance.

• To record the track based on a time interval, select Time >

Change, and enter the time interval.

• To record the track plot based on a variance from your

course, select Resolution > Change, and enter the

maximum error allowed from the true course before

recording a track point. This is the recommended

recording option.

Boundaries

Boundaries allow you to avoid or remain in designated areas in

a body of water. You can set an alarm to alert you when you

enter or exit a boundary.

You can create boundary areas, lines, and circles using the

map. You can also convert saved tracks and routes into

boundary lines. You can create a boundary area using

waypoints by creating a route from the waypoints, and

converting the route into a boundary line.

You can select a boundary to act as the active boundary. You

can add the active boundary data to the data fields on the chart.

Creating a Boundary

Select Info

> User Data > Boundaries > New Boundary

Select a boundary shape.

Follow the on-screen instructions.

Converting a Route to a Boundary

Before you can convert a route to a boundary, you must create

and save at least one route (Creating and Saving a Route,

page 12).

Select Info

> User Data > Routes & Auto Guidance Paths

Select a route.

Select Review

> Edit Route > Save as Boundary

Converting a Track to a Boundary

Before you can convert a track to a boundary, you must record

and save at least one track (Saving the Active Track, page 14).

Select Info

> User Data > Tracks > Saved Tracks

Select a track.

Select Select

> Edit Track > Save as Boundary

Editing a Boundary

Select Info

> User Data > Boundaries

Select a boundary.

Select Review

> Edit Boundary

Select an option:

• To edit the appearance of the boundary on the chart,

select Display Options.

• To change the boundary lines or name, select Edit

Boundary.

• To edit the boundary alarm, select Alarm

Setting a Boundary Alarm

Boundary alarms alert you when you are within a specified

distance of a set boundary.

Select Info >

User Data > Boundaries

Select a boundary.

Select Alarm > On.

Enter a distance.

Deleting a Boundary

Select Info

> User Data > Boundaries

Select a boundary.

Select Review > Edit Boundary

> Delete

Synchronizing User Data Across the

Garmin

Marine Network

NOTICE

Before you synchronize the user data across the network, you

should backup your user data to prevent possible data loss. See

Backing Up Data to a Computer, page 47.

You can share waypoints, tracks, and routes with all compatible

devices connected to the Garmin

Marine Network (Ethernet)

automatically.

NOTE: This feature is not available on all models.

Select Settings > Preferences >

User Data Sharing > On

If a change is made to a waypoint, track, or route on one

chartplotter, that data is synchronized automatically across all

chartplotters on the Ethernet network.

Deleting All Saved Waypoints, Routes, and

Tracks

Select

Info

> User Data > Clear User Data > All > OK

Sailing Features

Setting the Vessel Type

You can select your boat type to configure the chartplotter

settings and to use features customized for your boat type.

Select Settings > My Vessel > Vessel Type.

Select an option.

Sail Racing

You can use the device to increase the likelihood that your boat

will cross the start line of a race exactly when the race begins.

When you synchronize the race timer with the official race

Sailing Features 15

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 8422 MFD in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPSMAP 8422 MFD

Garmin GPSMAP 8422 MFD Installation Guide - English - 14 pages

Garmin GPSMAP 8422 MFD Installation Guide - German - 16 pages

Garmin GPSMAP 8422 MFD User Manual - German - 70 pages

Garmin GPSMAP 8422 MFD Installation Guide - Dutch - 14 pages

Garmin GPSMAP 8422 MFD User Manual - Dutch - 68 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin GPSMAP 8422 MFD Manual

Product: