658524
8
Zoom out
Zoom in
Previous page
1/14
Next page
Item Garmin Wire Function Garmin Wire Color NMEA 0183 Device Wire Function
Ì
Data ground Black Data ground
Í
Receive B (-) Orange/white N/A
Î
Receive A (+) White Transmit
Ï
Transmit A (+) Gray Receive
Ð
Transmit B (-) Pink N/A
If the NMEA 0183-compliant device has only one input (RX) wire (no A, B, +, or -), leave the pink wire unconnected.
If the NMEA 0183-compliant device has only one output (TX) wire (no A, B, +, or -), connect the orange/white wire to ground.
Consult the installation instructions of your NMEA 0183-compliant device to identify the output A(+) and B(-) wires and input A(+)
and B(-) wires.
Use 28 AWG, shielded, twisted-pair wiring for extended runs of wire.
Solder all connections and seal them with heat-shrink tubing.
Advanced NMEA 0183 Connections
There are four internal NMEA 0183 input ports (RX ports), and two internal NMEA 0183 output (TX ports) on the included NMEA
0183 data cable. You can connect one NMEA 0183 device per internal RX port to input data to your Garmin device, and you can
connect up to three NMEA 0183 devices in parallel to each internal TX port to receive data output by your Garmin device. Each
internal RX and TX port has 2 wires, labeled A (+) and B (-) according to the NMEA 0183 convention. The corresponding A (+) and
B (-) wires of each internal port should be connected to the A (+) and B (-) wires of your NMEA 0183-compliant device. Refer to the
table and wiring diagrams when connecting the data cable to NMEA 0183 devices.
Consult the installation instructions for your NMEA 0183-compliant device to identify the output (TX) A (+) and B (-) wires and input
(RX) A (+) and B (-) wires. Use 28 AWG, shielded, twisted-pair wiring for extended runs of wire. Solder all connections and seal
them with heat-shrink tubing.
For two-way communication with a NMEA 0183 device, the internal ports on the NMEA 0183 data cable are not linked. For
example, if the input of the NMEA-compliant device is connected to the internal output port 1 on the data cable, you can connect
the output port of your NMEA 0183-compliant device to any of the internal input ports (port 1, port 2, port 3, or port 4) on the
wiring harness.
The ground wires on the NMEA 0183 data cable and your NMEA 0183-compliant device must both be connected to ground.
See Specifications for a list of the approved NMEA 0183 sentences output by and input to your device.
The internal NMEA 0183 ports and communication protocols are configured on the connected Garmin device. See the NMEA
0183 section or communication configuration section of the owner's manual provided with your Garmin device for more
information.
Port Wire Function Wire Color Pin Number
Input port 1 RX/A (+) White
RX/B (-) Orange/white
Input port 2 RX/A (+) Brown
RX/B (-) Brown/white
Input port 3 RX/A (+) Violet
RX/B (-) Violet/white
Input port 4 RX/A (+) Black/white
RX/B (-) Red/white
Output port 1 TX/A (+) Gray
TX/B (-) Pink
Output port 2 TX/A (+) Blue
TX/B (-) Blue/white
8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 8000 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 8000 series in the language / languages: English as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPSMAP 8000 series

Garmin GPSMAP 8000 series User Manual - English - 62 pages

Garmin GPSMAP 8000 series Installation Guide - German - 16 pages

Garmin GPSMAP 8000 series User Manual - German - 70 pages

Garmin GPSMAP 8000 series Installation Guide - Dutch - 14 pages

Garmin GPSMAP 8000 series User Manual - Dutch - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info