Manual Garmin GPSMAP 7607 (page 40 of 62) (English)

657691

Zoom out

Zoom in

1/62

Deleting a Position-Report Call

Select Info >

DSC List

Select a position-report call.

Select Review > Clear Report.

Viewing Vessel Trails on the Chart

You can view trails for all tracked vessels on some chart views.

By default, a black line indicates the path of the vessel, a black

dot indicates each previously reported position of a tracked

vessel, and a blue flag indicates the last reported position of the

vessel.

From a chart or 3D chart view, select Menu

> Chart Setup >

Other Vessels > DSC > DSC Trails

Select the number of hours to show tracked vessels on the

chart.

For example, if you select

4 Hours, all trail points that are

less than four hours old appear for all tracked vessels.

Individual Routine Calls

When you connect the chartplotter to a

Garmin VHF radio, you

can use the chartplotter interface to set up an individual routine

call.

When setting up an individual routine call from your chartplotter,

you can select the DSC channel on which you want to

communicate. The radio transmits this request with your call.

Selecting a DSC Channel

NOTE: The selection of a DSC channel is limited to those

channels that are available in all frequency bands. The default

channel is 72. If you select a different channel, the chartplotter

uses that channel for subsequent calls until you call using

another channel.

Select Info

> DSC List

Select a vessel or a station to call.

Select Review

> Call with Radio > Channel

Select an available channel.

Making an Individual Routine Call

NOTE:

When initiating a call from the chartplotter, if the radio

does not have an MMSI number programmed, the radio will not

receive call information.

Select Info > DSC List.

Select a vessel or a station to call.

Select Review

> Call with Radio

If necessary, select Channel

, and select a new channel.

Select

Send.

The chartplotter sends information about the call to the radio.

On your

Garmin VHF radio, select Call.

Making an Individual Routine Call to an AIS Target

From a chart or 3D chart view, select an AIS target.

Select AIS Vessel > Call with Radio.

If necessary, select

Channel, and select a new channel.

Select

Send.

The chartplotter sends information about the call to the radio.

On your

Garmin VHF radio, select Call.

Gauges and Graphs

The gauges and graphs provide various information about the

engine and environment. To view the information, a compatible

transducer or sensor must be connected to the network.

Viewing the Gauges

Select A/V, Gauges, Controls.

Select a gauge.

Select or to view a different gauge page.

Changing the Data Shown in a Gauge

From a gauges screen, hold a gauge.

Select Replace Data.

Select a data type.

Select the data to display.

Customizing the Gauges

You can change the layout of the gauge pages, how the gauges

pages are displayed, and the data in each gauge.

Open a gauge page.

Select Menu

> Edit Gauge Pages

Select an option:

• To change the data shown in a gauge, select the gauge.

• To change the layout of the gauges on the page, select

Change Layout

• To add a page to this set of gauge pages, select Add

Page.

• To change the order of this page in the set of gauge

pages, select Move Page Left or

Move Page Right.

• To restore this page to the original view, select Restore

Default View.

Customizing Engine Gauge and Fuel Gauge Limits

You can configure the upper and lower limits and the range of

desired standard operation of a gauge.

NOTE:

Not all options are available for all gauges.

From an applicable gauges screen, select Menu >

Installation > Set Gauge Limits.

Select a gauge to customize.

Select an option:

• To set the minimum value of the standard operating

range, select Rated Min.

• To set the maximum value of the standard operating

range, select

Rated Max..

• To set the lower limit of the gauge lower than the rated

minimum, select

Scale Min..

• To set the upper limit of the gauge higher than the rated

maximum, select

Scale Max..

Select the limit value.

Repeat steps 4 and 5 to set additional gauge limits.

Viewing Engine and Fuel Gauges

Before you can view engine and fuel gauges, you must be

connected to a

NMEA 2000 network capable of sensing engine

and fuel data. See the installation instructions for details.

Select

A/V, Gauges, Controls > Engines.

Selecting the Number of Engines Shown in Gauges

You can show information for up to four engines.

From the engine gauges screen, select Menu > Installation

> Engine Selection > Number of Engines.

Select an option:

• Select the number of engines.

• Select Auto Configure to automatically detect the number

of engines.

32 Gauges and Graphs

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 7607 in the language / languages: English as an attachment in your email.

The manual is 2,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPSMAP 7607

Garmin GPSMAP 7607 Installation Guide - English - 8 pages

Garmin GPSMAP 7607 Installation Guide - German - 8 pages

Garmin GPSMAP 7607 User Manual - German - 72 pages

Garmin GPSMAP 7607 Installation Guide - Dutch - 8 pages

Garmin GPSMAP 7607 User Manual - Dutch - 68 pages

Garmin GPSMAP 7607 Installation Guide - French - 8 pages

Garmin GPSMAP 7607 User Manual - French - 70 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Garmin GPSMAP 7607 Manual

Product: