657694
52
Zoom out
Zoom in
Previous page
1/62
Next page
6
Select an option:
If the placement of the Auto Guidance line is satisfactory,
select Menu
> Navigation Options > Stop Navigation
,
and proceed to step 10.
If the Auto Guidance line is too close to known obstacles,
select Settings
> Preferences > Navigation > Auto
Guidance > Shoreline Distance > Far
.
If the turns in the Auto Guidance line are too wide, select
Settings
> Preferences > Navigation > Auto Guidance
> Shoreline Distance > Near
.
7
If you selected
Near or Far in step 6, review the placement of
the Auto Guidance line, and determine whether the line
safely avoids known obstacles and the turns enable efficient
travel.
Auto Guidance maintains a wide clearance from obstacles in
open water, even if you set the Shoreline Distance setting to
Near or Nearest. As a result, the chartplotter may not
reposition the Auto Guidance line, unless the destination
selected requires navigation through a narrow waterway.
8
Select an option:
If the placement of the Auto Guidance line is satisfactory,
select Menu
> Navigation Options > Stop Navigation
,
and proceed to step 10.
If the Auto Guidance line is too close to known obstacles,
select Settings
> Preferences > Navigation > Auto
Guidance > Shoreline Distance > Farthest
.
If the turns in the Auto Guidance line are too wide, select
Settings > Preferences > Navigation > Auto Guidance
> Shoreline Distance
> Nearest
.
9
If you selected Nearest or
Farthest in step 8, review the
placement of the Auto Guidance line, and determine
whether the line safely avoids known obstacles and the turns
enable efficient travel.
Auto Guidance maintains a wide clearance from obstacles in
open water, even if you set the Shoreline Distance setting to
Near or Nearest
. As a result, the chartplotter may not
reposition the Auto Guidance line, unless the destination
selected requires navigation through a narrow waterway.
10
Repeat steps 3 through 9 at least once more, using a
different destination each time, until you are familiar with the
functionality of the Shoreline Distance setting.
Communications Settings
NMEA
0183 Settings
Select
Settings
> Communications > NMEA 0183 Setup
.
Port Types: See Setting the Communication Format for Each
NMEA
0183 Port, page
44.
Output Sentences: See Configuring NMEA 0183 Output
Sentences, page 44.
Position Precision: Adjusts the number of digits to the right of
the decimal point for transmission of NMEA output.
XTE Precision: Adjusts the number of digits to the right of the
decimal point for
NMEA crosstalk error output.
Waypoint IDs: Sets the device to transmit waypoint names or
numbers via
NMEA 0183 while navigating. Using numbers
may resolve compatibility issues with older NMEA 0183
autopilots.
Defaults: Restores the
NMEA 0183 settings to the original
factory defaults.
Diagnostics: Displays
NMEA 0183 diagnostic information.
Configuring NMEA
0183 Output Sentences
You can enable and disable NMEA 0183 output sentences.
1
Select Settings
> Communications > NMEA 0183 Setup >
Output Sentences
.
2
Select an option.
3
Select one or more NMEA
0183 output sentences, and select
Back.
4
Repeat steps 2 and 3 to enable or disable additional output
sentences.
Setting the Communication Format for Each NMEA
0183
Port
You can configure the communication format for each internal
NMEA 0183 port when connecting your chartplotter to external
NMEA 0183 devices, a computer, or other Garmin devices.
1
Select Settings
> Communications > NMEA 0183 Setup >
Port Types
.
2
Select an input or output port.
3
Select a format:
To support the input or output of standard NMEA 0183
data, DSC, and sonar NMEA input support for the DPT,
MTW, and VHW sentences, select
NMEA Std..
To support the input or output of standard NMEA 0183
data for most AIS receivers, select
NMEA High Speed.
To support the input or output of
Garmin proprietary data
for interfacing with Garmin software, select Garmin.
4
Repeat steps 2–3 to configure additional input or output
ports.
NMEA 2000 Settings
Select Settings > Communications
> NMEA 2000 Setup
.
Device List: Displays the devices connected to the network.
Label Devices: Changes the labels for available connected
devices.
Naming Devices and Sensors on the Network
You can name devices and sensors connected to the Garmin
Marine Network and the NMEA 2000 network.
1
Select Settings
> Communications
.
2
Select
Marine Network or
NMEA 2000 Setup > Device List.
3
Select a device from the list on the left.
4
Select
Change Name.
5
Enter the name, and select Done.
Marine Network
The Marine Network allows you to share data from Garmin
peripheral devices with the chartplotters quickly and easily. You
can connect a chartplotter to the Marine Network to receive data
from and share data with other devices and chartplotters that
are compatible with the Marine Network.
Select Settings > Communications > Marine Network.
Setting Alarms
Navigation Alarms
Select Settings
> Alarms > Navigation
.
Arrival: Sets an alarm to sound when you are within a specified
distance or time from a turn or a destination.
Anchor Drag: Sets an alarm to sound when you exceed a
specified drift distance while anchored.
Off Course: Sets an alarm to sound when you are off course by
a specified distance.
Setting the Anchor Drag Alarm
You can set an alarm to sound if you have moved more than an
allowable distance. This is very useful when anchoring
overnight.
1
Select Settings
> Alarms > Navigation > Anchor Drag
.
2
Select
Alarm to turn on the alarm.
3
Select
Set Radius, and select a distance on the chart.
44 Device Configuration
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 7416 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 7416 in the language / languages: English as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPSMAP 7416

Garmin GPSMAP 7416 Installation Guide - English - 8 pages

Garmin GPSMAP 7416 Installation Guide - German - 8 pages

Garmin GPSMAP 7416 User Manual - German - 72 pages

Garmin GPSMAP 7416 Installation Guide - Dutch - 8 pages

Garmin GPSMAP 7416 User Manual - Dutch - 68 pages

Garmin GPSMAP 7416 Installation Guide - French - 8 pages

Garmin GPSMAP 7416 User Manual - French - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info