657692
54
Zoom out
Zoom in
Previous page
1/62
Next page
4
Select Settings
> My Vessel > Temp. Offset
.
5
Enter the temperature offset calculated in step 3.
Calibrating a Water Speed Device
If you have a speed-sensing transducer connected to the
chartplotter, you can calibrate that speed-sensing device to
improve the accuracy of water-speed data displayed by the
chartplotter.
1
Select Settings
> My Vessel > Calibrate Water Speed
.
2
Follow the on-screen instructions.
If the boat is not moving fast enough or the speed sensor is
not registering a speed, a message appears.
3
Select
OK, and safely increase the boat speed.
4
If the message appears again, stop the boat, and ensure the
speed-sensor wheel is not stuck.
5
If the wheel turns freely, check the cable connections.
6
If you continue to get the message, contact Garmin product
support.
Other Vessels Settings
When your compatible chartplotter is connected to an AIS
device or VHF radio, you can set up how other vessels are
displayed on the chartplotter.
Select
Settings
> Other Vessels
.
AIS: Enables and disables AIS signal reception.
DSC: Enables and disables digital selective calling (DSC).
Collision Alarm: Sets the collision alarm (Setting the Safe-Zone
Collision Alarm,
page
7).
AIS-EPIRB Test: Enables test signals from Emergency Position
Indicating Radio Beacons (EPRIB).
AIS-MOB Test: Enables test signals from man overboard (MOB)
devices.
AIS-SART Test: Enables test transmissions from Search and
Rescue Transponders (SART).
Settings that are Synced on the Garmin
Marine Network
The following devices sync certain settings when connected to
the
Garmin Marine Network.
echoMAP
70 series
GPSMAP 507 series (software version 3.0 or later)
GPSMAP 701 series (software version 3.0 or later)
GPSMAP 702 series
GPSMAP 800 series
GPSMAP 902 series
GPSMAP 1000 series
GPSMAP 1002 series
GPSMAP 1202 series
GPSMAP 7400/7600 series
GPSMAP 8400/8600 series
The following settings are synced, if applicable, to the device.
Alarm Settings (also syncs alarm acknowledgment):
Arrival
Anchor Drag
Off Course
GPS Accuracy
Shallow Water
Deep Water
(Not available in the GPSMAP 8400/8600
series)
Water Temp.
Contour (Not available in echoMAP 70s and GPSMAP
507/701 series)
Fish
Collision Alarm
General Settings:
Auto Guidance
Preferred Depth
Auto Guidance Vertical Clearance
Beeper
Color Mode
Keyboard Layout
Language
Map Datum
North Reference
Position Format
System Units
Calibrate Water Speed
Radar Antenna Size
Chart Settings:
Chart Borders
Hazard Colors
Heading Line
Land POIs
Light Sectors
Navaid Size
Navaid Type
Photo Points
Preferred Depth
Shallow Shading
Service Points
Vessel Icon (Cannot be synced between all models)
Restoring the Original Chartplotter Factory
Settings
NOTE:
This procedure deletes all settings information you have
entered.
1
Select Settings >
System > System Information > Factory
Settings
.
2
Select an option.
Communication with Wireless Devices
The chartplotters can create a wireless network to which you
can connect wireless devices.
Connecting wireless devices allows you to use Garmin apps,
including BlueChart
Mobile and Garmin Helm
. See
www.garmin.com for more information.
WiFi
®
Network
Setting Up the WiFi
Wireless Network
The chartplotters can create a WiFi
network to which you can
connect wireless devices. The first time you access the wireless
network settings, you are prompted to set up the network.
1
Select Settings > Communications
> Wi-Fi® Network >
Wi-Fi® > On > OK
.
2
If necessary, enter a name for this wireless network.
3
Enter a password.
You will need this password to access the wireless network
from a wireless device. The password is case-sensitive.
46 Communication with Wireless Devices
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 7400 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 7400 series in the language / languages: English as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPSMAP 7400 series

Garmin GPSMAP 7400 series Installation Guide - English - 8 pages

Garmin GPSMAP 7400 series Installation Guide - German - 8 pages

Garmin GPSMAP 7400 series User Manual - German - 72 pages

Garmin GPSMAP 7400 series Installation Guide - Dutch - 8 pages

Garmin GPSMAP 7400 series User Manual - Dutch - 68 pages

Garmin GPSMAP 7400 series Installation Guide - French - 8 pages

Garmin GPSMAP 7400 series User Manual - French - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info