657692
44
Zoom out
Zoom in
Previous page
1/62
Next page
DAB Playback
When you connect a compatible Digital Audio Broadcasting
(DAB) module and antenna, such as the
FUSION
®
MS-
DAB100A
to a compatible stereo, you can tune in to and play
DAB stations
To use the DAB source, you must be in a region in which DAB is
available, and select the tuner region (
Setting the DAB Tuner
Region, page 36).
Setting the DAB Tuner Region
You must select the region you are in to receive DAB stations
properly.
1
From the media screen, select Menu > Installation >
Tuner
Region
.
2
Select the region you are in.
Scanning for DAB Stations
Before you can scan for DAB stations, you must connect a
compatible DAB module and antenna (not included) to the
stereo. Because DAB signals are broadcast in select countries
only, you must also set the tuner region to a location where DAB
signals are broadcast.
1
Select the DAB source.
2
Select
Scan to scan for available DAB stations.
When scanning is complete, the first available station in the
first ensemble found begins playing.
NOTE:
After the first scan is complete, you can select Scan
again to re-scan for DAB stations. When the re-scan is
complete, the system starts playing the first station in the
ensemble you were listening to when you started the re-scan.
Changing DAB Stations
1
Select the
DAB source.
2
If necessary, select
Scan to scan for local DAB stations.
3
Select or to change the station.
When you reach the end of the current ensemble, the stereo
automatically changes to the first available station in the next
ensemble.
Selecting a DAB Station from a List
1
From the DAB media screen, select Browse > Stations.
2
Select a station from the list.
Selecting a DAB Station from a Category
1
From the DAB media screen, select Browse > Categories.
2
Select a category from the list.
3
Select a station from the list.
DAB Presets
You can save your favorite DAB stations as presets for easy
access.
You can save up to 15 DAB-station presets.
Saving a DAB Station as a Preset
1
From the DAB media screen, select the station to save as a
preset.
2
Select Browse >
Presets > Save Current
.
Selecting a DAB Preset from a List
1
From the DAB media screen, select Browse > Presets >
View Presets.
2
Select a preset from the list.
Removing DAB Presets
1
From the DAB media screen, select Browse > Presets.
2
Select an option:
To remove one preset, select Remove Preset, and select
the preset.
To remove all presets, select Remove All Presets.
SiriusXM
Satellite Radio
When you have a FUSION-Link
capable stereo and SiriusXM
Connect Tuner installed and connected to the chartplotter, you
may have access to SiriusXM satellite radio, depending on your
subscription.
Locating a
SiriusXM Radio ID
Before you can activate your SiriusXM
subscription, you must
have the radio ID of your SiriusXM Connect Tuner.
You can locate the SiriusXM Radio ID on the back of the
SiriusXM Connect Tuner, on the back of its packaging, or by
tuning your chartplotter to channel 0.
1
Select Media
> Source > SiriusXM
.
2
Tune to channel 0.
The SiriusXM radio ID does not include the letters I, O, S, or
F.
Activating a
SiriusXM Subscription
Before you can activate the
SiriusXM subscription, you must
have the Radio ID (
Locating a SiriusXM Radio ID,
page
36).
1
With the
SiriusXM source selected, tune to channel 1.
You should be able to hear the preview channel. If not, check
the SiriusXM Connect Tuner and antenna installation and
connections, and try again.
2
Tune to channel 0 to locate the Radio ID.
3
Contact
SiriusXM listener care by phone at (866) 635-2349 or
go to
www.siriusxm.com/activatenow to subscribe in the
United States. Contact
SiriusXM by phone at (877) 438-9677
or go to
www.siriusxm.ca/activatexm to subscribe in Canada.
4
Provide the Radio ID.
The activation process usually takes 10 to 15 minutes, but
can take up to an hour. For the SiriusXM Connect Tuner to
receive the activation message, it must be turned on and
receiving the SiriusXM
signal.
5
If the service is not activated within the hour, go to
http://care.siriusxm.com/refresh or contact
SiriusXM by phone
at 1-855-MYREFRESH (697-3373).
Customizing the Channel Guide
SiriusXM
radio channels are grouped in categories. You can
select the categories of channels that appear in the channel
guide.
Select an option:
If the media device is a FUSION-Link capable stereo,
select Media >
Browse > Channel
.
If the media device is a GXM
antenna, select Media >
Category.
Saving a
SiriusXM Channel to the Presets List
You can save your favorite channels to the presets list.
1
Select
Media.
2
Select the channel to save as a preset.
3
Select an option:
If the media device is a FUSION-Link
capable stereo,
select
Browse >
Presets
.
If the media device is a GXM antenna, select Menu >
Presets >
Add Current Channel
.
Unlocking SiriusXM
Parental Controls
1
From the media screen, select Browse
> Parental > Unlock
.
2
Enter your passcode.
The default passcode is 0000.
36 Media Player
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 7400 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 7400 series in the language / languages: English as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPSMAP 7400 series

Garmin GPSMAP 7400 series Installation Guide - English - 8 pages

Garmin GPSMAP 7400 series Installation Guide - German - 8 pages

Garmin GPSMAP 7400 series User Manual - German - 72 pages

Garmin GPSMAP 7400 series Installation Guide - Dutch - 8 pages

Garmin GPSMAP 7400 series User Manual - Dutch - 68 pages

Garmin GPSMAP 7400 series Installation Guide - French - 8 pages

Garmin GPSMAP 7400 series User Manual - French - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info