522239
87
Zoom out
Zoom in
Previous page
1/100
Next page
GPSMAP 700 Series Owner’s Manual 83
Digital Selective Calling
Changing the Appearance of a Trail Line
You can change the appearance of a trail line for a specic tracked vessel.
: The Mariner’s Eye 3D chart is available if you use a BlueChart g2 Vision SD card. The Fishing chart
is available if you use a BlueChart g2 Vision SD card or a BlueChart g2 SD card, or if your built-in map
supports Fishing charts.
1. From the Home screen, select .
2. Select , , , or .
3. Select  >  > .
4. Select a vessel.
5. Select  >  > .
6. Select a color for the trail line.
Individual Routine Calls
When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, you can use
the chartplotter interface to set up an individual routine call. When setting up an individual routine call from
your chartplotter, you can select the DSC channel on which you want to communicate (page 83). The radio
transmits this request with your call.
Selecting a DSC Channel
The selection of a DSC channel is limited to those channels that are available in all frequency bands:
6, 8, 9, 10, 13, 15, 16, 17, 67, 68, 69, 71, 72, 73, or 77. The default channel is 72. If you select a different
channel, the chartplotter uses that channel for subsequent calls until you call using another channel.
1. From the Home screen, select  >  > .
2. Select a vessel or a station to call.
3. Select  > .
4. Select a channel.
Making an Individual Routine Call
: When initiating a call from the chartplotter, if the radio does not have an MMSI number programmed,
the radio will not receive call information.
1. From the Home screen, select  >  > .
2. Select a vessel or a station to call.
3. Select  > .
The chartplotter sends information about the call to the radio.
4. On your Garmin VHF radio, select .
Making an Individual Routine Call to an AIS Target
When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, you can use
the chartplotter interface to set up an individual routine call to an AIS target. Before you start the call, you can
select a DSC channel other than the default channel, channel 72 (page 83).
1. From the Home screen, select .
2. Select a chart or a 3D chart view.
3. Touch an AIS target .
4. Select  >  > .
The chartplotter sends information about the call to the radio.
5. On your Garmin VHF radio, select .
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 700 in the language / languages: English as an attachment in your email.

The manual is 7,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPSMAP 700

Garmin GPSMAP 700 Installation Guide - English - 10 pages

Garmin GPSMAP 700 User Manual - English - 100 pages

Garmin GPSMAP 700 Installation Guide - German - 10 pages

Garmin GPSMAP 700 User Manual - German - 104 pages

Garmin GPSMAP 700 User Manual - Dutch - 42 pages

Garmin GPSMAP 700 Installation Guide - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info