522239
6
Zoom out
Zoom in
Previous page
1/100
Next page
2 GPSMAP 700 Series Owner’s Manual
Getting Started
Initial Chartplotter Settings
The rst time you turn on the chartplotter, you must congure a series of initial settings. You must also
congure these settings when restoring original factory settings (page 86). You can update each of these
settings later. Follow the on-screen directions to congure the initial settings.
GPS Satellite Signal Acquisition
When you turn on the chartplotter, the GPS receiver must collect satellite data and establish the current
location. When the chartplotter acquires satellite signals, the signal strength bars at the top of the Home screen
are green . When the chartplotter loses satellite signals, the green bars disappear and a ashing
question mark appears on the vehicle (boat) icon on the chart screen.
For more information about GPS, go to www.garmin.com/aboutGPS.
Adjusting the Backlight
1. From the Home screen, select  >  > > .
 Press and release from any screen to open the display screen.
2. Adjust the backlight:
Select >  to allow the chartplotter to adjust the backlight automatically, based on
ambient light.
Use the slider bar to manually adjust the backlight.
Select  to switch between Auto and Manual mode.
Adjusting the Color Mode
1. From the Home screen, select  >  >  > .
 Press and release from any screen to open the Display screen.
2 Select .
3. Select , , or .
The Auto setting automatically changes the color scheme based on sunrise and sunset times.
Inserting and Removing Data and Memory Cards
You can insert optional BlueChart
®
g2 Vision
®
data cards to view high-resolution satellite imagery and aerial
reference photos of ports, harbors, marinas, and other points of interest. You can insert blank SD memory cards
to transfer data such as waypoints, routes, and tracks to another compatible Garmin chartplotter or a computer
(page 52). The SD card slot is located on the front of the chartplotter.
Open the access door, insert the data card or the memory card (with the label
facing right) into the slot, and press the card until it clicks.
Press the data card or the memory card into the slot again and release it to eject the
card.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 700 in the language / languages: English as an attachment in your email.

The manual is 4,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPSMAP 700

Garmin GPSMAP 700 Installation Guide - English - 10 pages

Garmin GPSMAP 700 User Manual - English - 100 pages

Garmin GPSMAP 700 Installation Guide - German - 10 pages

Garmin GPSMAP 700 User Manual - German - 104 pages

Garmin GPSMAP 700 User Manual - Dutch - 42 pages

Garmin GPSMAP 700 Installation Guide - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info