501966
23
Zoom out
Zoom in
Previous page
1/136
Next page
GPSMAP
®
6000/7000 Series Owner’s Manual 17
Charts and 3D Chart Views
Select  to indicate the distance from your location in which AIS vessels appear. Select a
distance.
Select  >  to show MARPA-tagged vessels.
Select >  to show details about AIS-activated and MARPA-tagged vessels.
Select  to set the projected heading time for AIS-activated and MARPA-tagged vessels.
For the GPSMAP 6000 series, use the  or the  to enter the time. For the
GPSMAP 7000 series, use the on-screen keyboard. Select .
Select  to show the tracks of AIS vessels. Select the length of the track that appears using a trail.
Activating a Target for an AIS Vessel
: The Fishing chart and Mariner’s Eye 3D are available with a preprogrammed BlueChart g2 Vision
data card.
1. From the Home screen, select .
2. Select , , , or .
3. Complete an action:
For the GPSMAP 6000 series, use the  to select an AIS vessel.
For the GPSMAP 7000 series, touch an AIS vessel.
4. Select  > .
Viewing Information about a Targeted AIS Vessel
You can view the AIS signal status, MMSI, GPS speed, GPS heading, and other information that is reported
about a targeted AIS vessel.
1. From the Home screen, select .
2. Select , , , or .
3. Complete an action:
For the GPSMAP 6000 series, use the  to select an AIS vessel.
For the GPSMAP 7000 series, touch an AIS vessel.
4. Select .
Deactivating a Target for an AIS Vessel
: The Fishing chart and Mariner’s Eye 3D are available with a preprogrammed BlueChart g2 Vision
data card.
1. From the Home screen, select .
2. Select , , , or .
3. Complete an action:
For the GPSMAP 6000 series, use the  to select the AIS vessel.
For the GPSMAP 7000 series, touch the AIS vessel.
4. Select  > .
Setting the Safe-zone Collision Alarm
The safe-zone collision alarm is used only with AIS and MARPA. MARPA functionality works with radar
(page 77). The safe zone is used for collision avoidance, and can be customized. All safe-zone collision alarm
settings are applied to all charts, to all 3D chart views, to all radar modes, and to the Radar Overlay.
1. From the Home screen, select  >  > > .
A message banner appears and an alarm sounds when a MARPA-tagged object or an AIS-activated vessel
enters the safe-zone ring around your boat. The object is also labeled as dangerous on the screen. The 
setting disables the message banner and the audible alarm, but the object is still labeled as dangerous on the
screen.
2. Selectto set the measured radius of the safe-zone ring to a specied distance from 500 ft. to 2.0 nm
(or from 150 m to 3.0 km, or from 500 ft. to 2.0 mi.).
3. Select a distance.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 6000 in the language / languages: English as an attachment in your email.

The manual is 5,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPSMAP 6000

Garmin GPSMAP 6000 User Manual - German - 132 pages

Garmin GPSMAP 6000 User Manual - Dutch - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info