501949
38
Zoom out
Zoom in
Previous page
1/78
Next page
Viewing Information
32 GPSMAP 400/500 Series Owner’s Manual

1. From the Home screen, select  > > .
2. Select the left and right arrows on the  to move from one gauge
screen to the next.

To establish the upper and lower limits of a gauge and the range of desired
standard operation, you can congure up to four values for the engine gauge.
When a value exceeds the range of standard operation, the gauge face or bar
becomes red.
 
Scale
minimum
This value is less than the rated minimum, and it represents
the lower limit of the gauge� This setting is not available on all
gauges�
Scale
maximum
This value is greater than the rated maximum, and it
represents the upper limit of the gauge� This setting is not
available on all gauges�
Rated
minimum
Represents the minimum value of the standard operating
range�
Rated
maximum
Represents the maximum value of the standard operating
range�
1. From the Home screen, select  > >  >
 >  > .
2. Select a gauge.
3. Select  > .
4. Select the gauge limit you want to set (, , ,
or ).
 Some of these options may not be available for all gauges.
5. Select the gauge limit.
6. Repeat steps 4 and 5 to set additional gauge limits.

If you have activated gauge status alarms, when the engine sends a warning
status message over the NMEA 2000 network, a gauge status alarm message
appears. The gauge face or bar may become red depending on the alarm type.
From the Home screen, select  > >  >
 >  >  >.

1. From the Home screen, select  > >  >
 >  >  >.
2. Select one or more engine gauge alarms that you want to turn on or off.
3. Select .

The engine gauges can show information for up to four engines.
1. From the Home screen, select  > >  >
 >  >  > .
2. Select the number of engines.
3. Select .
To select the engines for which information appears in the gauges, select 
 and complete steps 2 through 5 of “Selecting the Engines Shown in
Gauges” (following section).
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 526 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 526 in the language / languages: English as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPSMAP 526

Garmin GPSMAP 526 Installation Guide - German - 12 pages

Garmin GPSMAP 526 User Manual - German - 84 pages

Garmin GPSMAP 526 User Manual - German - 72 pages

Garmin GPSMAP 526 Installation Guide - Dutch - 8 pages

Garmin GPSMAP 526 User Manual - Dutch - 84 pages

Garmin GPSMAP 526 User Manual - French - 72 pages

Garmin GPSMAP 526 Installation Guide - All languages - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info