583746
31
Zoom out
Zoom in
Previous page
1/196
Next page
AVIATION
Selecting an Approach
CAUTION: The approaches provided in the Jeppesen database
are for monitoring purposes only. The GPSMAP 496 is not an
IFR-approved instrument and should not be used as a primary
source of navigation guidance in instrument conditions.
When you select an approach, it replaces the destination airport with
the sequence of waypoints for the selected approach. Keep in mind
that the airport must have a published approach (GPS, RNAV, VOR,
NDB, localizer, or ILS) and only the final course segment (usually
from final approach fix to missed approach point) of the published
approach is available in the GPSMAP 496.
NOTE: When using a route, the selected approach for the
destination airport overrides your current route. The original
route is saved in the Route tab.
You can select an approach several ways:
Press Direct To and press MENU on the Go To Page, as
described in the steps to the right.
From the Active Go To (or Active Route) Page, press
MENU.
From the Airport Details Page, select the Approach tab.
To select an approach for the destination airport:
1. Press Direct To to show the Go To Page. Select the
destination you want to travel to.
2. Press MENU to open the options menu. Highlight Select
Approach, and press ENTER.
3. Use the ROCKER to select the approach from the window,
and press ENTER. A Vectors? window appears. See the
following page for more information on vectors.
Selecting an Approach
4. Use the ROCKER to select Yes or No, and press ENTER.
The GPSMAP 496 removes the destination airport from the
Go To and replaces it with the approach waypoints.
GPSMAP 496 Owner's Manual 23
BASIC OPERATION IN AVIATION MODE > SELECTING AN APPROACH
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 496 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 496 in the language / languages: English as an attachment in your email.

The manual is 4,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info