583909

Garmin GPSMAP 495 Manual

159
Zoom out
Zoom in
Previous page
1/179
Next page
GPSMAP 495 Owner’s Manual 151
Appendix > Loran TD Setup
To set up LORAN TD from the Main Menu:
1. Press MENU twice to show the Main Menu.
2. Use the ROCKER to highlight Setup on the vertical tab list. Then
select Location from the row of horizontal tabs.
3. Using the ROCKER, highlight the Location Format field and
press ENTER.
Location Sub Tab
4. Highlight Loran TD, and press ENTER.
5. Highlight the Setup button located on the right side of the
Location Format field, and press ENTER. The Loran TD Setup
window appears.
6. To change the settings of any of the five fields, highlight the field,
press ENTER, enter the setting using the ROCKER, and press
ENTER.
7. When finished, highlight the Save button, and press ENTER.
LORAN TD Setup
If the active GRI Chain, secondary stations, or offsets were changed
since the waypoint was created, the waypoint now references
the active GRI chain and secondary stations and adjust the TD
coordinates accordingly. Remember that the GPS is not relying
on the LORAN signal for navigation and actually converts the
TD coordinate to a useful latitude and longitude coordinate before
storing the waypoint to memory or using it for navigation. Because
of this, the unit can navigate to a TD coordinate anywhere in the
world.
You must know your GRI chain number and/or secondary stations
to create a LORAN TD location. For more information read our
LORAN TD Position Format Handbook, available at the Garmin
Web site, at
www.garmin.com/support/userManual.jsp.
… 159 …


Need help? Post your question in this forum.

Forumrules
1

Forum

garmin-gpsmap-495

Reset search

  • Hi
    Does the Garmin 495 perform a ‘predictive turn’ at waypoints, when slaved to an autopilot? Submitted on 21-11-2022 at 12:22

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 495 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 495 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info