65003
48
Zoom out
Zoom in
Previous page
1/72
Next page
42 GPSMAP 400/500 Series Owner’s Manual
Conguring the Chartplotter
Setting System Alarms
To set a system alarm from the Home screen, select Congure >
Alarms > System.
Clock—set an alarm using the system (GPS) clock. The unit must
be on for the clock alarm to work.
Battery
—set an alarm to sound when the battery reaches a specied
low voltage.
GPS Accuracy
—set an alarm to sound when the GPS location
accuracy falls outside the specied value.
Setting Sonar Alarms
To set a sonar alarm from the Home screen, select Congure >
Alarms > Sonar.
NOTE: You must be receiving NMEA sonar depth data or using a
Garmin sounder module to congure sonar alarms.
Shallow Water—set an alarm to sound when the depth is less than
the specied value.
Deep Water
—set an alarm to sound when the depth is greater than
the specied value.
Water Temp—set an alarm to sound when the transducer reports
a temperature that is 2°F (1.1°C) above or below the specied
temperature.
Fish
—set an alarm to sound when the unit detects a suspended
target of the specied symbols.
—sounds an alarm for all sh sizes.
—sounds an alarm for medium and large sh only.
—sounds an alarm for large sh only.
Setting the Total Fuel Onboard Alarm
You can congure your chartplotter to sound an alarm when the total
amount of remaining onboard fuel reaches the specied level.
NOTE: To receive fuel-level information, your unit must be
connected to an external fuel sensor, such as the Garmin GFS 10.
To enable the Total Fuel Onboard alarm and set the fuel
alarm level:
1. From the Home screen, select Congure > Alarms > Fuel >
Total Onboard > On (or Off).
2. If you select On, use the Rocker to indicate the fuel level at
which the alarm should sound.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 420s at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 420s in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPSMAP 420s

Garmin GPSMAP 420s User Manual - German - 72 pages

Garmin GPSMAP 420s User Manual - Dutch - 71 pages

Garmin GPSMAP 420s User Manual - French - 72 pages

Garmin GPSMAP 420s Installation Guide - All languages - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info