38892
64
Zoom out
Zoom in
Previous page
1/72
Next page
58 GPSMAP 400/500 Series Owner’s Manual
Appendix
Can’t Read Voltages That Low, Limited To Bottom Of Range
voltage value in the Battery Alarm setup is lower than the voltage
where the unit automatically turns off.
Can’t Unlock Maps—data on the data card is not unlocked for the
unit. Contact your dealer or Garmin Product Support.
Can’t Write User Card, Card May Be Full
—error reading card;
remove and reinsert. Contact your dealer or Garmin Product Support
if the problem persists.
Can’t Write User Card, Card Is Read-Only
—the SD card in your
unit contains data copy protection.
Card Needed—Your unit needs to have an SD card inserted into the
SD card slot in order to perform the function you requested.
DSC Position Report Received From
—shows the MMSI or name
associated with an MMSI.
Database Error
—internal problem with the unit. Contact your
dealer or Garmin Product Support to have the unit serviced.
Deep Water Alarm
—the Deep Water Alarm depth has been
reached.
Directory Item With This MMSI Already Exists
—the MMSI
number is already in the DSC directory. Use a different number.
Directory Memory is Full, Can’t Create Entry
—the DSC
directory has reached the maximum of 100 contacts. Delete
unneeded contacts to add new ones.
Distress Call
—a DSC distress call has been received. Take
appropriate action.
Entering (Leaving) target water temperature—the target water
temperature is 2°F (1.1°C) above or below the temperature specied
by the Water Temperature Alarm. These messages appear when you
enter or leave that zone.
Entering Safe Region—the boat is approaching a safe region as
dened by your conguration settings.
Entering Unsafe Region—the boat is approaching an unsafe region
as dened by your conguration settings.
Fish Alarm
—a beep sounds (if enabled) when a sh is detected.
This alarm does not show a message banner.
Invalid MMSI
—enter a valid MMSI.
Lost Satellite Reception—the unit has lost satellite signals. Check
antenna connections or try moving to a location with a clear view of
the sky.
NMEA Depth Is Below Transducer
—you must enter an
appropriate Keel Offset for the transducer (page 43).
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 420 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPSMAP 420

Garmin GPSMAP 420 Installation Guide - German - 12 pages

Garmin GPSMAP 420 User Manual - German - 72 pages

Garmin GPSMAP 420 User Manual - Dutch - 71 pages

Garmin GPSMAP 420 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info