501933
104
Zoom out
Zoom in
Previous page
1/116
Next page
100 GPSMAP
®
4000/5000 Series Owner’s Manual
Digital Selective Calling
Vessel Trails on the Navigation Chart
You can view trails for all tracked vessels on the Navigation Chart, the Fishing Chart, the Mariners Eye 3D
Chart view, and the Radar Overlay. By default, a black dot
appears for each previously reported position of
a tracked vessel, and a Blue Flag symbol
indicates the last reported position of the vessel. A black line
indicating the path of the vessel also appears.
You must enable the DSC Trails setting in order to view trails for tracked vessels (page 100).
: The Mariner’s Eye 3D chart view is available if you use a BlueChart g2 Vision data card. The Fishing
Chart is available if you use a BlueChart g2 Vision data card or a BlueChart g2 Data card, or if your built-in
map supports Fishing Charts.
Vessel Trail on the Navigation Chart
Showing and Setting the Duration of Trails for All Tracked Vessels
: The Mariner’s Eye 3D chart view is available if you use a BlueChart g2 Vision data card. The Fishing
Chart is available if you use a BlueChart g2 Vision data card or a BlueChart g2 Data card, or if your built-in
map supports Fishing Charts.
1. From the Home screen, select .
2. Select , , , or .
3. Select  >  >  > .
4. Select the number of hours to show tracked vessels on the chart or 3D chart view.
For example, if you select , all trail points that are less than four hours old appear for all tracked
vessels.
Individual Routine Calls
When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, you can use
the chartplotter interface to set up an individual routine call. When setting up an individual routine call from
your chartplotter, you can select the DSC channel on which you want to communicate (page 100). The radio
transmits this request with your call.
Selecting a DSC Channel
The selection of a DSC channel is limited to those channels that are available in all frequency bands:
6, 8, 9, 10, 13, 15, 16, 17, 67, 68, 69, 71, 72, 73, or 77. The default channel is 72. If you select a different
channel, the chartplotter uses that channel for subsequent calls until you call using another channel.
1. From the Home screen, select  > .
2. Select a vessel or a station to call.
3. Select  >  > .
4. Select a channel.
Making an Individual Routine Call
: When initiating a call from the chartplotter, if the radio does not have an MMSI number programmed,
the radio will not receive call information.
104


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 4010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 4010 in the language / languages: English as an attachment in your email.

The manual is 6,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPSMAP 4010

Garmin GPSMAP 4010 Quick start guide - English - 2 pages

Garmin GPSMAP 4010 Quick start guide - German - 2 pages

Garmin GPSMAP 4010 User Manual - German - 54 pages

Garmin GPSMAP 4010 Quick start guide - Dutch - 2 pages

Garmin GPSMAP 4010 User Manual - Dutch - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info