501933
49
Zoom out
Zoom in
Previous page
1/116
Next page
GPSMAP
®
4000/5000 Series Owner’s Manual 45
Almanac, Environmental, and On-boat Data
Conguring a Graph
You can set the scale and duration of the Atmospheric Pressure and Depth graphs. The duration represents the
time interval that appears on the graph, and the scale represents the range of the measured data that appears on
the graph, including specic maximum and minimum values.
1. From the Home screen, select  > .
2. Select  or .
3. Select .
4. Complete an action:
Select , and select  or  to set the duration.
Select . Select , , or. When you select , the chartplotter sets the optimal
minimum and maximum values for the range, based on environmental conditions. When the
chartplotter receives new data about environmental conditions, it adjusts the scale automatically.
Select  to allow the chartplotter to set the optimal minimum and maximum values for the
range, based on environmental conditions.  is only displayed when  is already selected
for .
For Atmospheric Pressure only, select , and select the reference time used to calculate the
barometer trend displayed in the top left corner of the graph.
Wind Speed Data
Selecting Apparent, True, or Ground Wind for the Wind Graph
The chartplotter must be connected to the peripheral devices listed below to capture the data shown on the
wind speed graph.
Wind Speed Description Required Sensors
Apparent Wind Shows wind speed data based on the ow of
air experienced while on a boat in motion�
A wind sensor
True Wind Shows wind speed data based on the ow of
air experienced while on a stationary boat�
For the most-accurate data, the Wind Speed
Source setting should be set to Auto
(page 52)�
A wind sensor and a water speed sensor; or a
wind sensor and a GPS antenna�
Ground Wind Shows wind speed data based on the ow of
air experienced while on shore�
A wind sensor, a water speed sensor, a
heading sensor, and a GPS antenna; or a
wind sensor and a GPS antenna; or a wind
sensor, a water-speed sensor, and a heading
sensor
1. From the Home screen, select  >  > .
2. Select the type of wind speed data included on the graph (, , or 
).
Conguring the Wind Speed Sources
You can specify whether the vessel speed data displayed on the compass is based on water speed or GPS
speed. Water speed is the speed reading from a water-speed sensor, and GPS speed is calculated from your
GPS position.
1. From the Home screen, select  > >  > .
2. Select .
3. Complete an action:
Select  to indicate that the calculated wind speed is based on data from a Water Speed
sensor.
Select  to indicate that the calculated wind speed is based on data from a GPS antenna.
Select  to allow the chartplotter to select a speed data source automatically.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 4010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 4010 in the language / languages: English as an attachment in your email.

The manual is 6,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPSMAP 4010

Garmin GPSMAP 4010 Quick start guide - English - 2 pages

Garmin GPSMAP 4010 Quick start guide - German - 2 pages

Garmin GPSMAP 4010 User Manual - German - 54 pages

Garmin GPSMAP 4010 Quick start guide - Dutch - 2 pages

Garmin GPSMAP 4010 User Manual - Dutch - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info