583643
118
Zoom out
Zoom in
Previous page
1/130
Next page
110 GPSMAP 3206/3210 Owner’s Manual
aPPendIX > Messages and alarMs
appendIX
Messages and Alarms
The GPSMAP 3206/3210 uses an on-screen message system to alert you to unit
operating characteristics. Press QUIT to acknowledge the message.
Accuracy Alarm—the GPS accuracy has fallen outside of the user-set value.
Alarm Clock—the alarm clock has sounded.
Anchor Drag Alarm—you have drifted out of the specied distance range.
Approaching Turn—you are nearing a turn in a route.
Approaching <Waypoint>—you are a specied alarm distance from a
destination waypoint.
Arrival At <Waypoint>—you arrived at the destination waypoint.
Battery Alarm—battery voltage has fallen below the value specied in the
Battery eld on the Alarms tab.
Battery Voltage Is Too High
—too much input voltage; the unit shuts off in 10
seconds. Decrease the input voltage to less than 32 volts.
Boat is not Moving Fast Enough to Calibrate—the boat is not moving fast
enough for the speed wheel to provide a valid speed.
Can’t Read User Card—error reading card; remove and reinsert. Contact your
dealer or Garmin Product Support if the problem persists.
Can’t Read Voltages That High, Limited To Top Of Range
—voltage range
must be between 10.0 and 35.0 volts for the GPSMAP 3206/3210.
Can’t Read Voltages That Low, Limited To Bottom Of Range
—voltage range
must be between 10.0 and 35.0 volts for the GPSMAP 3206/3210.
Can’t Send Waypoint—the unit cannot transmit the waypoint using the NMEA
WPL sentence. Check the wiring.
Can’t Unlock Maps—the data on data card is not unlocked for the unit. Contact
your dealer or Garmin Product Support.
Can’t Write User Card—error reading card; remove and reinsert. Contact your
dealer or Garmin Product Support if the problem persists.
Database Error—internal problem with the unit. Contact your dealer or Garmin
Product Support to have the unit serviced.
Deep Water Alarm—the depth changed by the amount of the Drift Alarm value.
Directory Item With This MMSI Already Exists—the MMSI number is already
in DSC directory. Use a different number.
Directory Memory is Full Can’t Create Entry—the DSC directory has reached
the maximum of 100 contacts. Delete unneeded contacts to add new ones.
Distress Call—a DSC distress call has been received. Take appropriate action.
Drift Alarm—the depth has changed by the amount of the Drift Alarm value.
Fish Alarm—shows an icon and a beep sounds (if enabled) when a sh is
detected. This alarm does not show a message banner.
Invalid MMSI— enter a valid MMSI.
Lost Remote GPS Connection
—there is a problem with the GPS antenna
wiring. Check the connections.
Lost Satellite Reception
—the unit has lost satellite signals. Check the antenna
connections or try moving to a location with a clear view of the sky.
NMEA Depth Is Below Transducer—you must enter an appropriate Keel Offset
for the transducer.
No Proximity Waypoints/Routes/Tracks/User Waypoints Found—you
attempted to transfer user data from a data card that does not contain the specied
type of data. Make sure there is data to transfer on data card.
None Found—no data matched the search criteria.
118


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 3210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 3210 in the language / languages: English as an attachment in your email.

The manual is 4,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info