583643

Garmin GPSMAP 3210 Manual

114
Zoom out
Zoom in
Previous page
1/130
Next page
106 GPSMAP 3206/3210 Owner’s Manual
aPPendIX > loran td sYsteM
appendIX
LORAN TD System
LORAN-C is a radio navigation aid operated and maintained in the United States
by the United States Coast Guard. The LORAN (LOng RAnge Navigation)
system covers the entire United States and the U.S. Coastal Conuence Zone.
From the perspective of a mariner, the system is used for ocean and coastal
navigation. It can be used as a supplemental system for harbor and harbor
approach navigation, and it is used for inland navigation by recreational vehicles.
LORAN TD Feature
The LORAN TD (Time Delay) feature eases the transition from using LORAN
to using GPS. The GPSMAP unit automatically converts GPS coordinates to
LORAN TD for those who have a collection of LORAN xes for favorite shing
spots and other waypoints recorded as TDs. You can display your position as a
TD or enter waypoints as TDs. The accuracy to be expected from this conversion
is approximately 30 meters. When the unit is placed in the LORAN TD format
mode, it simulates the operation of a LORAN receiver. Position coordinates may
be displayed as TDs, and all navigation functions may be used as if the unit was
actually receiving LORAN signals.
Using the LORAN TD Format
When creating new waypoints using LORAN TD coordinates, you must set the
correct LORAN chain number and secondary stations in the Setup TD eld
before storing a waypoint. You must have the correct chain number as well as the
secondary station identiers to use this option correctly. These values vary for
each coordinate set or geographical location. Failure to enter correct information
could result in inaccuracies for the desired destination. After the waypoint is
stored in the unit’s memory, it always references the LORAN chain number
and secondary stations currently selected in the Setup TD eld. If you enter a
different LORAN chain number, change the secondary stations or offsets in the
Setup TD eld, the active waypoint information reects those changes. Because
the GPSMAP 3206/3210 unit does not rely on the LORAN signal for navigation,
it can reference a different GRI chain or secondary stations and still navigate to
the location stored in memory.
The LORAN Position Format eld is located on the Units sub tab on the Main
Menu—System tab. The Loran TD Setup window contains the elds to select the
LORAN Chain Number, Primary and Secondary Stations, and TD Offsets.
To set up LORAN TD from the Main Menu:
1. UsingtheROCKER,highlighttheSystemtab,pressrightontheROCKER
tohighlighttheUnitssubtab.HighlightthePosition Formateld,and
pressENTER.
2. HighlightLoran TD,andpressENTER,andthenhighlighttheSetup
buttontotheright,andpressENTERagain.
3. Tochangethesettingsofanyoftheveelds,highlighttheeld,press
ENTER,selectthesettingyouwant,andpressENTERagain.
… 114 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 3210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 3210 in the language / languages: English as an attachment in your email.

The manual is 4,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info