522241
72
Zoom out
Zoom in
Previous page
1/96
Next page
70
Getting Started
Main Page Sequence
70
Reference
Automatic Backlight – automatically adjusts the display brightness to a specifi ed level at sunrise and
sunset. Offset minutes for Before Sunrise and After Sunset may also be specifi ed.
To adjust the Automatic Backlight settings:
1. With Automatic Backlight” set to ‘On’, select the ‘Setup’ button to the right.
2. To adjust the backlight levels For Day and For Night, highlight the desired slider and press ENTER.
3. Press UP or DOWN on the ARROW KEYPAD to increase/decrease the level and press ENTER.
4. To adjust the offset minutes, select the desired minutes fi eld and press ENTER.
5. Enter the desired offset for Before Sunrise or After Sunset. If left at zero, the unit automatically changes to
the specifi ed level at sunrise/sunset. Press QUIT to exit the Adjust Backlight window.
Beeper – controls audible beep. Select from ‘Off’, ‘Alarms Only’ (sounds for alarms/messages), or
‘Key and Alarm’ (sounds for key presses and alarms/messages).
Language – select from various languages for the unit’s on-screen display.
The following option buttons are available:
Factory Settings – restores all settings to Garmin’s original setup values for the entire unit.
System Information – displays the unit’s software, basemap version, and electronic serial number.
Services - As you add optional hardware to the MFD or Garmin Marine Network, additional
Services choices may appear automatically. Once a new device has been detected on the Network,
unchecking the “Auto-Detect Services” option will speed up the power on sequence. If unchecked
and new hardware is added, you must manually check the box to enable the new device.
Units Submenu Tab— defi nes settings for Position Format, Depth, Map Datum, Temperature,
Distance, Speed, and Elevation, Pressure, and Heading.
The following settings are available:
Position Format – is used to change the coordinate system in which a given position reading is dis-
played. You should only change the position format if you are using a map or chart that specifi es a
different position format or wish to use a format you are familiar with. The default format is latitude
and longitude in degrees, minutes, and thousandths of a minute (hddd°mm.mmm’).
Main Menu—System Tab
(Units Submenu)
Main Menu: System Tab
Automatic Backlight Adjustment
Sliders
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 3006C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 3006C in the language / languages: English as an attachment in your email.

The manual is 3,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPSMAP 3006C

Garmin GPSMAP 3006C Installation Guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info