522241
26
Zoom out
Zoom in
Previous page
1/96
Next page
24
Getting Started
Main Page Sequence
24
Getting Started
Basic Navigation
Navigating to a Waypoint
GPS is all about marking positions as waypoints and navigating to them using the receiver’s steering
guidance and map displays. We’ve already seen how to use the ENTER/MARK key to store our present
position, so it’s time to move on to the fun part—going to a destination.
The NAV/MOB key is the primary tool used to select a destination Waypoint, TracBack (pg. 45), or a
Route (pg. 49) to navigate. The NAV key can be used in two primary ways:
Pressing NAV once displays a list of options from which you can select ‘Go To Point’, ‘Follow Route’,
‘Follow Track’, ‘TracBack’, or ‘Stop Navigation’.
Highlighting an on-screen waypoint or map item as a destination directly from the Map Page and
pressing NAV allows you to graphically select points to “Go To”.
When you begin navigation to a waypoint, the GPS sets a straight-line course to that point. The unit
draws a Course Line on the display between the current GPS location and the destination waypoint. You
may use the Map, Compass, or Highway Main Pages (or confi gure any of the other Main Pages) for naviga-
tion. For this exercise, let’s use the Compass Page. You may use the “Practice 1” waypoint you created on
the previous page or any other waypoint you have created.
Going to a waypoint:
1. Press the NAV key.
2. Highlight ‘Go To Point’ and press
ENTER (or press the DATA ENTRY shortcut number).
3. Highlight ‘Waypoints’ and press
ENTER. This displays the ‘Find Waypoints’ window. From this window you
can select waypoints by “Nearest” or “By Name”. Select the ‘Nearest’ tab using the
ARROW KEYPAD.
4. Press the
ARROW KEYPAD UP or DOWN to scroll through the list until the waypoint you wish to navi-
gate to is highlighted. Press
ENTER to display the waypoint Review page.
5. With the ‘Go To’ button highlighted, press
ENTER to begin navigation.
Press the PAGE key and select the Compass Page.
Going to a Waypoint
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 3006C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 3006C in the language / languages: English as an attachment in your email.

The manual is 3,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPSMAP 3006C

Garmin GPSMAP 3006C Installation Guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info