64506
95
Zoom out
Zoom in
Previous page
1/138
Next page
Text Out—allows the unit to output simple text data that
includes data, time, location, and velocity. The Baud can be
set to 1200, 2400, 4800, or 9600.
None—provides no interfacing capabilities.
If you select GARMIN DGPS or RTCM In/NMEA Out format,
you can control a differential beacon receiver directly from your
GPSMAP 278 using the COM 1 or COM 2 sub tab. You can have
the unit automatically scan for the DGPS beacon signal, or you
can enter the beacon frequency and bit rate on the unit, and the
information will be used to tune the beacon receiver. If you use a
DGPS receiver, WAAS capability is automatically turned off.
To have the unit automatically scan for a frequency:
1. Set the unit to GARMIN DGPS or RTCM In/NMEA Out.
2. Highlight the Beacon eld, and press ENTER.
3. Highlight Scan, and press ENTER. The numbers in the
Frequency eld change as the unit scans from 284 kHz to
325 kHz, 200 bit rate, then 100, at 6-second intervals.
COM 1 Sub Tab with Garmin DGPS Selected
Highlight Scan
and press
ENTER.
Shows the
status of the
scan
The Status eld shows one of the following:
Tuning—the unit is attempting to tune to the specied
frequency and bit rate.
Scanning—the unit is automatically scanning through the
frequencies and bit rates.
Receiving—the unit is receiving DGPS signal and ready for
operation.
Check Wiring—the unit is not making connection with
DGPS receiver.
GPSMAP 278 Owner’s Manual 87
MAIn Menu > setuP tAb
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 278C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 278C in the language / languages: English as an attachment in your email.

The manual is 8,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info