67131

Garmin GPSMAP 276C Manual

13
Zoom out
Zoom in
Previous page
1/134
Next page
The progress of satellite acquisition is shown in three stages:
•
No signal strength bars—the receiver is looking for the
satellites indicated.
•
White signal strength bars—the receiver has found the
satellite and is collecting data.
•
Green signal strength bars—the receiver has collected the
necessary data from this satellite.
When the GPSMAP 276C collects the necessary data from the best
satellites in view to calculate a x, the status eld indicates the status
of the receiver. The unit then updates the location, date, and time.
Receiver Status
The Receiver Status eld shows one of the following conditions:
•
Searching the Sky—the receiver is looking for satellites.
•
AutoLocate—the receiver is looking for any satellite whose
almanac was collected, which can take up to ve minutes.
•
Acquiring Satellites—the receiver is looking for and
collecting data from satellites visible at its last known or
initialized location but has not acquired a x.
•
2D GPS Location—At least three satellites were acquired
and a two-dimensional position x was calculated.
“2D Differential” appears when you are receiving DGPS
corrections in 2D mode, and a “D” appears on the strength bar
of satellites being corrected.
•
3D GPS Location—At least four satellites were acquired
and a three-dimensional x was calculated. “3D Differential”
appears when you are receiving DGPS corrections in
3D mode, and a “D” appears on the strength bar of satellites
being corrected.
•
Lost Satellite Reception—the receiver is no longer tracking
enough satellites for a 2D or 3D x.
•
Receiver Not Usable—the receiver is unusable, possibly due
to interference or abnormal satellite conditions. Turn the unit
off and back on to reset.
• Simulating GPS—the receiver is in Simulator Mode.
•
GPS Off—the GPS receiver is turned off.
GPSMAP 276C Owner’s Manual 5
gettIng stArted > gettIng sAtellIte sIgnAls
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 276C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 276C in the language / languages: English as an attachment in your email.

The manual is 6,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info