583796
116
Zoom out
Zoom in
Previous page
1/134
Next page
106
Appendix F
Messages
Battery Voltage High Please Check Connection— Input DC voltage is
too high for unit.
Battery Voltage Low Please Check Connection— Input DC voltage is
too low for unit.
Boat is Not Moving Fast Enough to Calibrate— Speed wheel is not
turning. Check for debris or boat speed is too slow.
Database Error— Internal problem with the unit. Contact your dealer or
Garmin Customer Service (pg. iv) to have the unit serviced.
Deep Water Alarm— Specifi ed deep water alarm depth has been detected
below transducer.
Lost Satellite Reception— The unit has lost satellite signals. Check
antenna connections or try moving to a location with a clear view of the sky.
Memory (RAM) Failed Unit Needs Repair— Internal problem with the
unit. Contact your dealer or Garmin Customer Service (pg. iv) to have the
unit serviced.
Memory (ROM) Failed Unit Needs Repair— Internal problem with the
unit. Contact your dealer or Garmin Customer Service (pg. iv) to have the
unit serviced.
No DGPS Position— No differential correction data is available or not
enough data is available to compute a DGPS position.
No Tide Stations For That Area— There are no tide stations within 100
miles of the specifi ed point. Try another area.
Off Course Alarm— You have exceeded the specifi ed off-course distance.
Processor Failed Unit Needs Repair— Internal problem with the unit.
Contact your dealer or Garmin Customer Service (pg. iv) to have the unit
serviced.
The GPSMAP 188/188C/238 Sounder uses an on-screen pop-up mes-
sage system to alert you to unit operating characteristics. Press the ENTER
key to acknowledge and return to the page you were viewing.
Alarm Clock— The alarm clock has sounded.
Alarm Voltage Set Too High— Voltage range must be between 8.0 and
35.0 volts for the GPSMAP 188/238 (GPSMAP 188C 10.0 to 35.0 volts).
Alarm Voltage Set Too Low — Voltage range must be between 8.0 and
35.0 volts for the GPSMAP 188/238 (GPSMAP 188C 10.0 to 35.0 volts).
Anchor Drag Alarm— You have drifted out of the specifi ed distance
range.
Antenna Input Shorted To Ground— Check antenna wiring/connections
or antenna replacement.
Approaching Waypoint— You are a specifi ed alarm distance from a
destination waypoint.
Arrival At Waypoint— You have arrived at the destination waypoint.
Basemap Failed Unit Needs Repair— Internal problem with the unit.
Contact your dealer or Garmin Customer Service (pg. iv) to have the unit
serviced.
Battery Alarm— Specifi ed amount of input voltage has been detected.
188188C238 Manual Part 2.indd 106 6/30/2003, 3:32:48 PM
116


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 238 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 238 in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info