583795
109
Zoom out
Zoom in
Previous page
1/134
Next page
99
Appendix A
Testing the Installation
Testing the Installation
While it is possible to perform some checks with the boat trailered, the boat should be in the water
to properly test the sonar portion of the installation.
Press the POWER button and the GPSMAP 188/188C/238 Sounder should power on. If the unit
fails to power on, verify that the wiring adapter is seated properly in the back of the unit, the Red and
Black wires are connected to the correct polarity, and that the fuse is installed and not blown. If the
unit is connected to a power supply that exceeds 35 VDC, a “Battery Voltage High” warning will be
displayed and the unit will turn off.
Since water is necessary to carry the sounder’s sonar signal, the transducer must be in the water
to work properly. It is not possible to get a depth/distance reading when out of the water. As the
unit powers on, it should immediately start showing the bottom. Verify that the unit is not in the
simulator mode. If the unit is in the simulator mode, make sure that the transducer is connected to
the wiring harness.
To test the transducer installation, gradually increase the boat speed while checking the unit opera-
tion. If the unit displays intermittently or fails to display, verify that the transducer is aligned parallel
with the bottom and if necessary, adjust the transducer height until the unit operates correctly. It may
be necessary to make several adjustments to ensure proper operation throughout the speed range.
NOTE: When adjusting the depth of the transducer, make the adjustments in small
increments. Placing the transducer too deep can adversely affect the boat’s
performance and put the transducer at greater risk of striking underwater objects.
)
188188C238 Manual Part 2.indd 99 6/30/2003, 3:32:44 PM
109


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 188C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 188C in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info