583794
50
Zoom out
Zoom in
Previous page
1/134
Next page
40
Reference
Sonar Page Options
Calibrate Water Speed — this is only available if you are using a speed-capable transducer/sensor.
Calibration is required to ensure that the Water Speed displayed on your unit will be accurate. The
unit will automatically use the GPS ground speed, if it is available, for comparison on the calibra-
tion. If a GPS ground speed is not available, use either your boat’s speedometer reading (not always
accurate) or a stopwatch to determine your speed over a certain distance (distance / time = speed).
It is recommended that the calibration take place in water having little or no current.
To calibrate the water speed:
1. On the Sonar tab, use the ARROW KEYPAD to highlight ‘Calibrate Water Speed’ and press
ENTER.
2. Bring the boat to a cruising speed. The top ground and uncalibrated water speeds will be shown
at the bottom of the calibration window. Note your top water speed, then stop the boat and press
ENTER.
3. By default, the top ground speed is automatically shown in the ‘What was your top water speed?’
eld. If a ground speed is not available, the top uncalibrated water speed is used instead. If the new
speed is correct, highlight ‘OK’ and press ENTER. If you wish to manually enter a calibration, press
ENTER on the speed fi eld, enter a new speed and press ENTER.
4. You may also press MENU from the calibration screen and choose ‘Use Top Ground Speed’ to
default back to ground speed or ‘Use No Calibration’ to use the speed sensor’s uncalibrated speed.
NOTE: If the boat is not moving fast enough or the speed sensor is not outputting a
speed, you will see a “Boat Is Not Moving Fast Enough To Calibrate” message at the
bottom of the display. Check that the speed sensor wheel is moving or safely increase
boat speed. If there is a problem with the speed sensor/unit or if a speed senor is not
installed, a “Water Speed Sensor Is Not Working” message appears at the bottom of
the display. Check connections of speed sensor cables.
• Page Defaults — restores the Sonar Page settings to the original factory setup.
To restore default settings to the Sonar Tab:
1. Press MENU. With ‘Page Defaults’ highlighted, press ENTER.
Keel Offset:
Transducer at Surface
Enter (+) positive
number to show depth
from bottom of keel
Keel Offset: Transducer
at Bottom of Keel
Enter (-) negative number to
show depth from surface
Calibrating the
Speed Sensor
,
188188C238 Manual Part 1.indd 40 6/30/2003, 3:34:49 PM
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GpSMAP 188 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GpSMAP 188 in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info