522235
23
Zoom out
Zoom in
Previous page
1/104
Next page
13
Getting Started
Reviewing/Creating
Map Waypoints
You’ll now have a clearer picture of the route you are navigating. Keep in mind that whenever you
do exceed the usable range of the built-in database or the optional MapSource or BlueChart data in use,
the range fi eld will display ‘OVERZOOM’ to indicate that you should exercise extreme caution using the
map data. Press the IN key to zoom into the 2 nm scale. Now that you’ve zoomed in a little closer to
your route, you can pan ahead of your vessel with the cursor to review map items and create on-screen
waypoints. Try moving the cursor to highlight the ‘TOUR3’ waypoint— just use the ARROW KEYPAD
to move the cursor as close as possible to the waypoint. (To move the cursor in small increments, try
a series of short key presses.)
Once the cursor is over the TOUR3 waypoint, you’ll notice that the waypoint symbol and name will
become highlighted. The data fi eld at the top of the page will display the waypoint name, the range and
bearing from your present position, and the coordinates for the waypoint.
To review the waypoint page for a selected waypoint:
1. Press the ENTER/MARK key.
2. To return to the Map Page, press ENTER/MARK again or press QUIT.
The cursor can also be used to create new waypoints right from the map display.
To create a new waypoint using the cursor:
1. Use the ARROW KEYPAD to move the cursor as close as possible to the following position:
N35º 02.914; W 076º 26.152’ (Use the data window to verify the cursor position.)
2. Press and release the ENTER/MARK key to capture the cursor position. Do not hold the button
down, as doing so will mark your present position, not the map position.
3. Use the ARROW KEYPAD to highlight the waypoint symbol fi eld to the left of the waypoint
name/number.
4. Press ENTER/MARK to access the symbol page.
5. Press UP or DOWN on the ARROW KEYPAD to select the ‘Shipwreck’ symbol and press
ENTER/MARK to confi rm.
6. Highlight ‘OK’ at the bottom and ENTER/MARK again to fi nish.
The waypoint will ‘highlight’
when the cursor is moved
over it.
Waypoint numbering
will start with 001 and
continually count up,
even if the waypoint
name has been deleted.
182C Manual Part 1.indd 13 6/4/2003, 2:52:23 PM
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 182C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 182C in the language / languages: English as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info