522233

Garmin GPSMAP 172C Manual

20
Zoom out
Zoom in
Previous page
1/109
Next page
To mark your present position:
1. Hold down the ENTER/MARK key until the ‘New Waypoint’ window appears then release the key.
The window shows a default three-digit waypoint name/number (001), symbol (dot), and position.
You can leave the name as the auto-assigned number, but for this exercise, lets change the name to
‘DOCK’.
2. Use the ARROW KEYPAD to highlight the waypoint name field (001) and press
ENTER. You see
that just the first ‘0’ is now highlighted.
3. Press LEFT on the ARROW KEYPAD to clear the name field.
4. Press UP or DOWN on of the ARROW KEYPAD until the letter ‘D’ appears, and then press RIGHT
to go to the next space to the right, then UP or DOWN again until ‘O’ appears. Repeat this until
you have entered the name ‘DOCK’. If you make a mistake and select an incorrect character, simply
press LEFT on the ARROW KEYPAD to backspace the cursor and then UP or DOWN to correct the
entry. (If you accidentally press
ENTER before you are done, simply press ENTER again and move
the highlight to where you left off.)
5. After you have entered all the letters, press
ENTER to confirm the name.
6. To access the waypoint symbol page, highlight the waypoint symbol field which is to the left of the
waypoint’s name and press
ENTER. Note: The default symbol is a dot.
7. You see a grid of available waypoint symbols to choose from. Use the ARROW
KEYPAD to high-
light the ‘ANCHOR’ symbol.
8. Press
ENTER to confirm the ‘ANCHOR’ symbol.
9. Highlight ‘OK’ at the bottom of the window and press
ENTER again to confirm the ‘OK’ prompt
and save the waypoint.
The waypoint is now stored in memory. Note that waypoints may also be created graphically from
the map display or by manually entering position coordinates. Each of these techniques is described in
thes reference section of this manual.
Press ENTER/MARK
after entering the name.
You can choose from a list of useful symbols.
There are two Diver Down waypoint
symbols to select from: the International and
U.S. versions.
10
Getting Started
Marking Waypoints
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 172C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 172C in the language / languages: English as an attachment in your email.

The manual is 3,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info