583648
55
Zoom out
Zoom in
Previous page
1/123
Next page
44
Reference
Sonar Tab Options
,
,
To calibrate the water speed:
1. From the ‘Sonar’ tab, use the ARROW KEYPAD to highlight ‘Calibrate Water Speed’ and press
ENTER/MARK.
2. Bring the boat to a cruising speed. Both the top ground and uncalibrated water speeds will be
shown at the bottom of the calibration window. Note your top speed, then stop the boat and
press ENTER/MARK.
3. By default, the top ground speed will automatically show in the ‘What was your top water speed?’
eld. If a ground speed is not available, the top uncalibrated water speed will be used instead. If
the new speed is correct, highlight ‘OK’ and press ENTER/MARK. If you wish to manually enter a
calibration, press ENTER/MARK on the speed fi eld, enter a new speed and press ENTER/MARK.
4. You may also press MENU from the calibration screen and choose ‘Use Top Ground Speed’ to
default back to ground speed or ‘Use No Calibration’ to use the speed sensor’s uncalibrated speed.
If the boat is not moving fast enough or the speed sensor is not outputting a speed, you
will see a “Boat Is Not Moving Fast Enough To Calibrate” message at the bottom of the
display. Check that the speed sensor wheel is moving or safely increase boat speed.
If there is a problem with the speed sensor/unit or if a speed senor is not installed, a
‘Water Speed Sensor Is Not Working’ message will appear at the bottom of the display.
Check connections of speed sensor cables.
• Setup Page Layout— allows you to change the text size and number of data fi elds that will be
displayed.
• Change Data Fields— allows you to specify the type of data displayed in each data fi eld used
on the map display.
For detailed instructions on changing the data fi elds and layout of the Sonar Page, see page 35-37.
An error message will appear if the
speed sensor is not working or not
installed.
If a ground speed is not available, the
unit will use the uncalibrated water
speed.
168 Manual Part 1.indd 44 11/18/2002, 3:36:38 PM
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 168 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 168 in the language / languages: English as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info