583648
15
Zoom out
Zoom in
Previous page
1/123
Next page
4
Initializing the Receiver
Getting Started
The GPSMAP 168 Sounder’s advanced keypad system is designed to allow for fast, convenient
selection of navigation options and data entry. The Getting Started Tour will introduce you to the
keypad and provide a “hands-on” lesson in using the GPSMAP 168 Sounder. We strongly encourage
you to take the Getting Started tour before using your unit for actual navigation.
The GPSMAP 168 Sounder Quick Reference Guide contains helpful tips on using the unit and
performing various navigation tasks. It’s a good idea to keep the Quick Reference Guide nearby
whenever you’re operating your new GPSMAP 168 Sounder.
Initializing the Receiver
The fi rst time you power up your new GPSMAP 168 Sounder, the receiver must be given an
opportunity to collect satellite data and establish its present position. To ensure proper initialization, the
GPSMAP 168 Sounder is shipped from the factory in AutoLocate mode, which will allow the receiver
to “fi nd itself” anywhere in the world. To speed up the initialization process, we recommend using
the graphic initialization process described on the next page, which will usually provide a position
x within a few minutes.
Before you initialize, make sure the GPSMAP 168 Sounder unit and antenna have been correctly
installed on your vessel according to the instructions in Appendix G. The antenna needs to be in a clear
and unobstructed view of the sky to receive satellite signals.
To turn on the GPSMAP 168 Sounder:
1. Press and hold the POWER key until the power tone sounds and the display comes on, then
release the POWER key.
The Welcome Page will appear while the unit conducts a self-test. Once the internal test is
complete, a warning page will appear, asking you to read and acknowledge important information
regarding the proper use of the unit.
To acknowledge the warning:
1. After reading the warning, press the ENTER/MARK key if you agree.
GPSMAP 168 Sounder Self-Test Screen
GPSMAP 168 Sounder Warning Screen
168 Manual Part 1.indd 4 11/18/2002, 3:36:21 PM
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 168 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 168 in the language / languages: English as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info