657709

Garmin GPSMAP 1222 Manual

23
Zoom out
Zoom in
Previous page
1/60
Next page
2
Select a track.
3
Select SELECT
> Delete
.
Deleting All Saved Tracks
Select NAV INFO
> User Data > Clear User Data > Saved
Tracks
.
Retracing the Active Track
The track currently being recorded is called the active track.
1
Select NAV INFO
> User Data > Tracks > Follow Active
Track
.
2
Select an option:
• Select the time the active track began.
• Select
Entire Log.
3
Review the course indicated by the colored line.
4
Follow the colored line, steering to avoid land, shallow water,
and other obstacles.
Clearing the Active Track
Select NAV INFO
> User Data > Tracks > Clear Active
Track
.
The track memory is cleared, and the active track continues
to be recorded.
Managing the Track Log Memory During Recording
1
Select NAV INFO > User Data > Tracks > Active Track
Options.
2
Select
Record Mode.
3
Select an option:
• To record a track log until the track memory is full, select
Fill.
• To continuously record a track log, replacing the oldest
track data with new data, select Wrap
.
Configuring the Recording Interval of the Track Log
You can indicate the frequency at which the track plot is
recorded. Recording more frequent plots is more accurate but
fills the track log faster. The resolution interval is recommended
for the most efficient use of memory.
1
Select NAV INFO
> User Data > Tracks > Active Track
Options > Interval > Interval
.
2
Select an option:
• To record the track based on a distance between points,
select Distance
> Change
, and enter the distance.
• To record the track based on a time interval, select Time
>
Change
, and enter the time interval.
• To record the track plot based on a variance from your
course, select Resolution > Change, and enter the
maximum error allowed from the true course before
recording a track point. This is the recommended
recording option.
Boundaries
Boundaries allow you to avoid or remain in designated areas in
a body of water. You can set an alarm to alert you when you
enter or exit a boundary.
You can create boundary areas, lines, and circles using the
map. You can also convert saved tracks and routes into
boundary lines. You can create a boundary area using
waypoints by creating a route from the waypoints, and
converting the route into a boundary line.
You can select a boundary to act as the active boundary. You
can add the active boundary data to the data fields on the chart.
Creating a Boundary
1
Select NAV INFO
> User Data > Boundaries > New
.
2
Select a boundary shape.
3
Follow the on-screen instructions.
Converting a Route to a Boundary
Before you can convert a route to a boundary, you must create
and save at least one route (Creating and Saving a Route,
page 12)
.
1
Select NAV INFO
> User Data > Routes
.
2
Select a route.
3
Select Review >
Edit Route > Save as Boundary
.
Converting a Track to a Boundary
Before you can convert a track to a boundary, you must record
and save at least one track (Saving the Active Track, page 14)
.
1
Select NAV INFO
> User Data > Tracks > Saved Tracks
.
2
Select a track.
3
Select SELECT > Edit Track > Save as Boundary.
Editing a Boundary
1
Select NAV INFO
> User Data > Boundaries
.
2
Select a boundary.
3
Select Review > Edit Boundary.
4
Select an option:
• To edit the appearance of the boundary on the chart,
select
Display Options.
• To change the boundary lines or name, select Edit
Boundary.
• To edit the boundary alarm, select Alarm
.
Setting a Boundary Alarm
Boundary alarms alert you when you are within a specified
distance of a set boundary.
1
Select NAV INFO
> User Data > Boundaries
.
2
Select a boundary.
3
Select Alarm
> On
.
4
Enter a distance.
Deleting a Boundary
1
Select NAV INFO
> User Data > Boundaries
.
2
Select a boundary.
3
Select Review
> Edit Boundary > Delete
.
Synchronizing User Data Across the
Garmin
Marine Network
NOTICE
Before you synchronize the user data across the network, you
should backup your user data to prevent possible data loss. See
Backing Up Data to a Computer,
page
46.
You can share waypoints, tracks, and routes with all compatible
devices connected to the Garmin Marine Network (Ethernet)
automatically.
NOTE:
This feature is not available on all models.
Select
Settings > Preferences > User Data Sharing > On.
If a change is made to a waypoint, track, or route on one
chartplotter, that data is synchronized automatically across all
chartplotters on the Ethernet network.
Deleting All Saved Waypoints, Routes, and
Tracks
Select
NAV INFO
> User Data > Clear User Data > All >
OK
.
Navigation with a Chartplotter 15
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GPSMAP 1222 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GPSMAP 1222 in the language / languages: English as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin GPSMAP 1222

Garmin GPSMAP 1222 Installation Guide - English - 8 pages

Garmin GPSMAP 1222 Installation Guide - German - 8 pages

Garmin GPSMAP 1222 User Manual - German - 70 pages

Garmin GPSMAP 1222 User Manual - Dutch - 66 pages

Garmin GPSMAP 1222 Installation Guide - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info